Using Two Exhaust Fans with AirCycler g2/FanConnect

A customer of ours recently asked if it was possible to operate two exhaust fans in two different bathrooms with the AirCycler g2 and FanConnect switch, to get double the exhaust ventilation counted toward the ventilation requirements. The answers is yes.


Here's how, using one FanConnect switch to control two fans:

1. By using a standard 3-way switch in the second bath and wiring to the FanConnect switch, the FanConnect can turn on the exhaust fan in the second bath at the same time it turns on the exhaust fan in the first bath. Otherwise, the second exhaust fan will continue to function normally, turning on when a user flips the 3-way switch.


2. Any time the FanConnect switch is turned on, both fans will run and that time as well as the following delay time will be counted as ventilation at the combined rate of both fans.


3. When required, the AirCycler g2 controller will activate both fans at the same time to provide needed supplemental ventilation.

4. When setting the Measured Exhaust Airflow in the g2 setup mode, enter the flow for both exhaust fans.

More information on the operation and installation of both the AirCycler g2 controller and the FanConnect switch can be found here.

Tags: AirCycler, FanConnect, exhaust, g2, ventilation

Views: 472

Reply to This

Featured Forum Discussions

Too many BTU's. Too much horsepower?

Started by Steve in General Forum. Last reply by Eric Kjelshus 9 hours ago. 4 Replies

Stack/wind pressure and flow networks.

Started by Daniel James Grundy in Training. Last reply by Daniel James Grundy yesterday. 5 Replies

BDT with vermiculite in hollow CMU walls?

Started by Brad Cook in General Forum. Last reply by John Nicholas yesterday. 2 Replies

Strange IR Image

Started by Larry Nissman in General Forum. Last reply by Brad Cook Mar 9. 7 Replies

Videos

  • Add Videos
  • View All

Latest Activity

Eric Kjelshus replied to Steve's discussion Too many BTU's. Too much horsepower?
"Its more about run time with high RH removing, than to large over sized AC unit, in houses.  …"
9 hours ago
Sarah OConnell posted a blog post

Crowdsourcing for Innovation

Share Your Ideas!Novel Building Envelope Design for Increased Thermal PerformanceIn 2014, more than…See More
23 hours ago
Colin de Paor is now a member of Home Energy Pros
yesterday
Walter Ahlgrim replied to Steve's discussion Too many BTU's. Too much horsepower?
"The 5 ton system you have is not 500 hp racecar engines they are 500 hp truck engines. The duct…"
yesterday
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"So I wanted to start with a basic who can help then go into more detail later. But yes find…"
yesterday
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"My tutor got back to me and while areas don't quite feel right a little to much assumptions…"
yesterday
Brennan Less replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"Daniel, I'm assuming you're trying to predict the airflows through the different openings…"
yesterday
Martin Newmark joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
yesterday

Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service