Trends in space conditioning systems in high performance homes, looking for your insight

Can anyone comment on the common types of heating and cooling systems installed in their region in high performance homes?  More and more, I see designers and builders turning away from forced air and towards radiant hydronic or point-source systems (like mini-splits).  Reasons include mismatch between load and size of forced air furnaces, zoning control, lower pumping energy, distribution system takes up less space, better integration with solar thermal, etc.  Granted my scope is mostly California.  Can people comment from other regions about trends in conditioning systems in high performance homes?  Cheers!  

Views: 248

Reply to This

Replies to This Discussion

Mini-splits are excellent for homes with open floor plans. If a home has a lot of smaller rooms mini-splits don't do so well. Getting contractors to believe you can cool a 2,000 sq ft house with a 2ton central A/C unit can be a challenge.

Brennan,

Combi-systems for forced air is what we have been exploring in MN.  It is a compelling alternative to a separate furnace and water heater especially when the loads are low because you can add the heating load with the water heating load.  We obviously have much higher heating loads in MN, but I know that Dan and Gavin from Balance Point have been using this approach for low load homes in CA.  We have been mostly using a sealed combustion water heater combined with a hydronic air handler within the existing ductwork.  It would be much better with an appropriately sized/sealed duct system, but we are making it work in our existing since most of our ductwork is within the thermal boundary in MN.  Since we are using the water heater as the combustion unit, there is potential to hook up to a solar thermal array in certain products.  Let me know if you want any more info on this approach.  (Get my email from Iain).

Becky Olson

In California geothermal heat pump systems and air handlers with evaporative cooling.  In some instances, you can do with evaporative cooling alone without requiring mechanical cooling.  If you are in northern California, air side economizers are a must.  But I would say a lot of homes are going the geothermal heat pumps route because of federal rebates and when you purchase one it the price can be fixed into your mortgage instead of paying for the whole system at once.

You know I thought one day I would get a chance to share this story. A while back I worked for a buddy of mine on a big job for him putting in wall paper on a really nice 9 K sq. ft. home. The owner was very nice and obviously had retired well. He asked me what I did full time and said I,m trying to get an energy audit buisness off the ground. He informed me he retired from a regional sales buisness selling HVAC equipment. So I asked what he thought of any new trends in the industry. He told me to look outside and see the heat pumps...NINE ! outdoor units,they were in their own 4 ft deep concrete pits so they wouldn't be seen at eye level,split systems for 9K sq. ft......I came back in the house and told him " they look great!" and never spoke of matter again..Who am I to tell a guy with 30 yrs in the buisness and a 10mil. dollar home to show for it what he should do with his money. My point is 'know your market" in this situation.  

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.

Latest Activity

Bryce Cramer joined Leslie McDowell, BPI's group
Thumbnail

Building Performance Institute (BPI)

BPI is the nation's premier standards development, quality assurance and credentialing organization…See More
2 hours ago
Bryce Cramer replied to Mike Kandel's discussion June's Stump the Chump: What's Wrong with this Picture? in the group Building Performance Institute (BPI)
"Key is this was done in warm weather. The back wall of the room was also uninsulated, but the lower…"
2 hours ago
James Hatheway added a discussion to the group Job Board
Thumbnail

Quality Assurance Verification Specialist - Little Rock, Arkansas

CLEAResult (clearesult.com) is looking for a QA Verification professional who wants to leverage…See More
4 hours ago
Profile IconJames Hatheway and Mike Wallis joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
4 hours ago
Profile IconJames Hatheway, Malcolm Gray, Perry Ning and 2 more joined Home Energy Pros
4 hours ago
tedkidd commented on Mike Rogers's blog post HOMES Act introduced with Bi-Partisan Sponsorship
"% savings programs suck.  Ask the folks in CA.  When your incentive structure pits…"
6 hours ago
Emilian Karchev joined Michael Stuart's group
Thumbnail

INFRARED THERMOGRAPHY USERS

This group is dedicated to knowledge sharing and discussion of infrared thermography for building…See More
12 hours ago
Emilian Karchev replied to Tim Marlett's discussion Removal of bad smells from mold contaminated attic
"I think to have mold, then there is moisture and is good if you can look at and make a…"
12 hours ago
Jack Sadyak commented on Jack Sadyak's blog post Why Getting a Quantum Heat Pump is a Better Choice?
"Hello Tom, Don't worry I will let you know everything you can contact me at Heat Pumps…"
15 hours ago
Dennis Heidner commented on Macie Melendez's blog post Passive Proponent—Q&A with Brandon Weiss
"Don't forget Build America program from…"
18 hours ago
John Wes joined James Sayers's group
Thumbnail

Marketing Energy Efficiency

Sharing ideas, tools and examples of promoting energy efficiency to consumersSee More
18 hours ago
John Wes joined Tom White's group
Thumbnail

Weatherization

Share your concerns and successes as a weatherization professional, or information for this…See More
18 hours ago

© 2013   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service