Trends in space conditioning systems in high performance homes, looking for your insight

Can anyone comment on the common types of heating and cooling systems installed in their region in high performance homes?  More and more, I see designers and builders turning away from forced air and towards radiant hydronic or point-source systems (like mini-splits).  Reasons include mismatch between load and size of forced air furnaces, zoning control, lower pumping energy, distribution system takes up less space, better integration with solar thermal, etc.  Granted my scope is mostly California.  Can people comment from other regions about trends in conditioning systems in high performance homes?  Cheers!  

Views: 238

Reply to This

Replies to This Discussion

Mini-splits are excellent for homes with open floor plans. If a home has a lot of smaller rooms mini-splits don't do so well. Getting contractors to believe you can cool a 2,000 sq ft house with a 2ton central A/C unit can be a challenge.

Brennan,

Combi-systems for forced air is what we have been exploring in MN.  It is a compelling alternative to a separate furnace and water heater especially when the loads are low because you can add the heating load with the water heating load.  We obviously have much higher heating loads in MN, but I know that Dan and Gavin from Balance Point have been using this approach for low load homes in CA.  We have been mostly using a sealed combustion water heater combined with a hydronic air handler within the existing ductwork.  It would be much better with an appropriately sized/sealed duct system, but we are making it work in our existing since most of our ductwork is within the thermal boundary in MN.  Since we are using the water heater as the combustion unit, there is potential to hook up to a solar thermal array in certain products.  Let me know if you want any more info on this approach.  (Get my email from Iain).

Becky Olson

In California geothermal heat pump systems and air handlers with evaporative cooling.  In some instances, you can do with evaporative cooling alone without requiring mechanical cooling.  If you are in northern California, air side economizers are a must.  But I would say a lot of homes are going the geothermal heat pumps route because of federal rebates and when you purchase one it the price can be fixed into your mortgage instead of paying for the whole system at once.

You know I thought one day I would get a chance to share this story. A while back I worked for a buddy of mine on a big job for him putting in wall paper on a really nice 9 K sq. ft. home. The owner was very nice and obviously had retired well. He asked me what I did full time and said I,m trying to get an energy audit buisness off the ground. He informed me he retired from a regional sales buisness selling HVAC equipment. So I asked what he thought of any new trends in the industry. He told me to look outside and see the heat pumps...NINE ! outdoor units,they were in their own 4 ft deep concrete pits so they wouldn't be seen at eye level,split systems for 9K sq. ft......I came back in the house and told him " they look great!" and never spoke of matter again..Who am I to tell a guy with 30 yrs in the buisness and a 10mil. dollar home to show for it what he should do with his money. My point is 'know your market" in this situation.  

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.

Latest Activity

Mark Richardson added a discussion to the group Renewable Energy
Thumbnail

Disasters & sustainable energy

Read my response to J.C. Martel's discussion:…See More
5 hours ago
Mark Richardson replied to J.C. Martel's discussion Disasters & sustainable energy
"Hi All, Interesting topic - myriad issues in play here, but I’ll try to touch on the ones I…"
5 hours ago
Eric Kjelshus replied to Johnny Ritzo's discussion Selecting a Water Heater
"I have been using  Rheem or State or Brad/white PVC flued tank type hot water heater…"
18 hours ago
Bachi Brunato replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
"As it turns out, we have 10 Halo 99RT housings with Halo 998P Eyeball trim in the kitchen. The trim…"
20 hours ago
Bachi Brunato's discussion was featured

Boxing and Insulating Around Non-ICAT Cans

I have a client with 16) 4" halogen recessed light fixtures in the attic.I'd like to cover the cans…See More
22 hours ago
Johnny Ritzo's discussion was featured

Selecting a Water Heater

I am looking at updating the heating and water heating systems in a rental home I recently…See More
22 hours ago
George Kopf's discussion was featured

Misting Aeroseal in Pressurized Home = Amazing Air Sealing Innovation

As a training program manager for a non-profit, I am often too busy managing my program to catch…See More
22 hours ago
Tom Delconte's blog post was featured
22 hours ago
Christopher Morin's blog post was featured

Selling with Rebates: The Simple Payback

  The easiest way to show a homeowner how their investment in high-efficient equipment will help…See More
22 hours ago
Edward Foskey's blog post was featured
22 hours ago
Mike Rogers's blog post was featured

HOMES Act introduced with Bi-Partisan Sponsorship

We don't see a lot of bi-partisan bills in Congress these days. Here's one focusing on home…See More
22 hours ago
Mike Rogers posted a blog post

HOMES Act introduced with Bi-Partisan Sponsorship

We don't see a lot of bi-partisan bills in Congress these days. Here's one focusing on home…See More
yesterday

© 2013   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service