Hello all,

 

I'm looking for energy audit training centers in the Boston, MA area.  Can anyone make any recommendations ?

 

Thanks,

 

Silvie

Views: 78

Reply to This

Replies to This Discussion

Here's what a google search for BPI Boston yields.

BPI.org has a list of bpi trainers in the Boston area. You can check with these places to see if they have a course in auditing. You can join linkedin and then the resnet group and ask for training in the Boston area.  Also, if you need IR training go to the Snell group and see when they offer training in the area.

Check community colleges to see if they have green collar auditing training.

Thanks for mentioning us, Carol--and what timing! We have a Level I Buildings course next week in the Boston area! For additional information that is on this site, click here. Otherwise you can go to our site or call us at 1-800-636-9820. As of today, there was still a couple of seats left in the course.
Thanks Carol,  Great info
If you are in the SE Mass/Cape Cod area, Cape & Islands Self Reliance is putting on BPI Envelope training next week for free and will provide an BPI Building Analyst course at the end of March also for free.  Check out http://www.reliance.org/ or call them for more information.

Hi Paul,

 

Do you work with that organization?  I tried to get a hold of the coordinator but it looks like she is on mat leave.  I'm  going to be in the Boston area for a few days in March and was looking to visit a few training centers, potentially give free training materials and do Retrotec equipment introductions for those interested. 

So, I went to their website and the "latest news"is from last fall. Are they still in business? And where did you find information on their BPI courses?

They definitely are still in business.  I teach their BPI courses for them.  Silvie, you should conact Megan Amsler megan@reliance.org  I'm sure she would love to hear from you.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
29 minutes ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
41 minutes ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
3 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
4 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
5 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
6 hours ago
Lars olsen posted a blog post
13 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service