I have a programmable thermostat that is, well, dumb. It is willing to set times and abide by those, but it doesn't take in to account the weather.  What I'm looking for is a smart thermostat that can learn my behavior and also make decisions based on the humidity inside the house and the temperature outside.

NEST and other smart thermostats seem to be able to predict temperature but not more advanced analytics. Does anyone know a thermostat that can move with the weather? Especially for sudden warm or cold fronts, it makes sense to set thermostat based on temperature and not hours of the day. We generally keep our thermostat warmer in the summer due to the wide difference between RH and temperature inside and out. 80 feels so much cooler on a hot summer day than in a late spring heat wave.

Ideally it would be a thermostat that can raise the setpoint with the outside temperature (say 15degrees trailing, max 85 degrees) throughout the day and also based on relative humidity (say 60%).  Then, as the day cools down, lower the setpoint based on the outside temperature and the relative humidity (Leading 15 degrees with a floor at 72, 40%RH). This way I could minimize the deltaT while keeping my house relatively dry.  

Tags: Thermostat

Views: 229

Reply to This

Replies to This Discussion

There are three settings on the Nest.  Heat Only == Cool Only == Heat Cool.  I have several customers on the H/C setting during these shoulder seasons.  It does that.  Not as sophisticated  as your description above. Effective, yes.

The best equipment for doing this "communicating" equipment.  I'm most familiar with Carrier Infinity series, but American Standard and Goodman offer similar control I believe.

Infinity can manage airflow and staging.  This allows it to adjust focus from removing sensible to removing latent.  If you really want air conditioning to have that "doesn't feel like air conditioning, just feels comfortable" outcome, you need to go this direction.  

Some Inverter Driven Mini-Splits can operate using the same principals.  

If you can't afford/justify changing equipment, you can adjust certain set up features of Ecobee and Continuous commissioning/ watching performance.  http://bit.ly/4ecobeethermostats.

Ted,  Without using name brands or proprietary terms,  how would you suggest specifying 'communicating equipment'?  

Very easy to spec 'Builder's Grade'  80 AFUE, single speed draft induced gas fired furnace with 13 SEER AC.  Or Upgrade to 90+ AFUE sealed combustion with 15 SEER or Upgrade 2 to 94+ sealed combustion with 16+ SEER AC.  and so on.

I could use an Upgrade Level III in my arsenal.

Hi John,

That is stretching me a fair distance outside my expertise.  Let me convey the idea, then you can design to it:

Imagine you have a milk jug with a few holes in it.  You want to keep it 1/2 full of water and place it under a tap.  Your design strategy is to keep it as close to 1/2 full without ever shutting the tap off.  Shut the tap off and you get a big penalty.  Turn the tap on like a fire hose, you get a big penalty.  

The water is proxy for thermal comfort and fresh air.  A modulating boiler outdoor reset on steroids. 

So your thermostat needs to know how to manage the throttle on a LOT of things.  BTU management AND adjusting airflow, and in the really sweet equipment, compressor adjusts and exv adjusts refrigerant efficiency. 

NOW we have to design so airflow stays above .08 and below .4-.5 if you really want optimal distribution, distribution cost, and even comfort.  Too high, costly and noisy.  Rare occasion too low, trickling/uneven distribution.  So we test ESP on existing equipment and hope we can bring that typically terrible number into line when we drastically down size the replacement.

Since you are constantly and cheaply (fans laws) mixing air, why not inject fresh, latent managed air into that btu circulation?  Sure, why not?  http://bit.ly/VentDehum 

All temps stay in line - Latent/Sensible/Mean Radiant.  Super efficient.  Super comfortable.  

Comfort - http://bit.ly/comfortcalculator

Super Efficient - http://bit.ly/rickchitwood

Hope that helps.  Let me know if it looks like Greek instead of English...

Some of the higher end Emerson thermostats do this. It's called "cool savings" and adjusts the setpoint automatically based on system run time. The more the system runs, the greater the offset.

http://hvac-talk.com/vbb/attachment.php?attachmentid=200842&d=1...

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Don Fitchett posted a blog post

Small Businesses: Diversify with Infrared Thermography Services, Save Your Business, Save the Country...

HERS should all offer Infrared Thermography Services.It is all ways great advice for small…See More
9 hours ago
Richard Beyer replied to Mike Kandel's discussion Our Homes Suck – And That's Why Our Kids Have Sinus Problems
""There are thousands of potential harmful products that can contribute to existing homes poor…"
10 hours ago
Richard Beyer replied to Mike Kandel's discussion Our Homes Suck – And That's Why Our Kids Have Sinus Problems
"Barbara, We both know a fan switch will only conserve on energy. What is Berkeley devising to clean…"
10 hours ago
Richard Beyer replied to Mike Kandel's discussion Our Homes Suck – And That's Why Our Kids Have Sinus Problems
"Ted no one can help anyone with their head stuck in the sand. All you said is MONEY is your God.…"
11 hours ago
Richard Beyer replied to Richard Beyer's discussion Spontaneous Combustion and Flash Fire regarding Spray Foam Insulation
"Hal, Thank you for laying out those facts. Fire safety is just as important of an issue as energy…"
11 hours ago
Don Fitchett commented on Diane Chojnowski's group Facebook Pages
"I just went through the 1st 2 pages of member's facebook pages liking them. While our training…"
12 hours ago
Don Fitchett joined Diane Chojnowski's group
Thumbnail

Facebook Pages

Does your company or organization have a Facebook Page?This group is for pros who have facebook…See More
13 hours ago
Mike Kandel added 3 discussions to the group Building Performance Institute (BPI)
13 hours ago
Mike Kandel posted discussions
13 hours ago
EnergyLogic Academy updated an event

RESNET Phase 2 Rater Training - Field Training at EnergyLogic Academy - Berthoud CO

September 22, 2014 to September 24, 2014
The EnergyLogic Academy will be hosting the second phase of HERS Rater Training August 4th - 7th,…See More
13 hours ago
Mike Kandel commented on David Byrnes's blog post Strategies To Keep Millennials At Their Peak Performance In A Home Performance Company
"David - I'd like to speak with you about this article. Please email me at mkandel@bpi.org."
14 hours ago
Hal Skinner replied to Richard Beyer's discussion Spontaneous Combustion and Flash Fire regarding Spray Foam Insulation
"This thread has certainly turned into what sounds like  a thread from a fire safety website…"
17 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service