We are looking at spray foam and whether we will be able to use it without an ignition barrier in crawlspaces or attics. The initial opinion is not unless it meets ASTM E 84 with less than 25 flame spread and 450 smoke density. Meaning, only fire retardent foams will be permitted unless you want to spend the money on ignition barriers. Have you had any code enforcement officials enforcing this yet? How are you dealing with this issue? Do you use any foam on ductwork in unconditioned spaces.

Views: 887

Reply to This

Replies to This Discussion

I would recommend you check this post/blog out http://homeenergypros.lbl.gov/profiles/blogs/codes-ignition-barrier... to get a better handle on the who, what, when, options, etc...

With that said, I don't know of any in my area that check much less enforce it 

Thanks for the links. It appears that they come to the same conclusion. We are in SW VA and here several inspections departments are enforcing this code.

I do not have a full cavity foaming rig, but when I do I sub the work out to a subcontractor.  He carries a full cavity open cell spray foam product that is fire rated and does not need to have an ignition barrier on it.  The product is Gaco Firestop I can not say that i am an expert in it but i have used it a few times in areas where the homeowner was not interested in dry walling and finishing the space.  It cost a little more than common open celled spray foams but the lack of need to spend days on the site easily makes up for that.

Watch out for thermal barrier requirements in addition to your ignition barrier concerns. If a crawlspace is open or has access to a basement their may be code enforcement issues with some crawlspaces. To deal with this the choice is to not use foam or make sure there is a thermal barrier seperating the basement and crawlspace. Some foam does get used on ductwork but it must be the fire rated formula. The fire rated stuff looks identical to the standard foam most use. You would need to get your hands on the technical data sheet (easy to find online). Similar foam but slightly different density, R value and cost. Hope that helps you.

When we use this product we place a laminated technical data sheet in the given area and give the home owner a copy to keep with their receipt to show any one that may ask what the product is and that it does not need to be covered with a fire barrier.  It can be deceptive and when with out the data sheets there would be no way to know that the foam is fire rated.

Cory is right, watch out for thermal barrier requirements as well.  In it's simplest form if you can walk up to it on any given day it will require a thermal barrier.  if it is harder to get to you will need an ignition barrier.  The FS /SD numbers from the E-85 teat are not enough.  Foam plastic has it's own section in the IRC.

Thanks. The foam plastic section of the IRC 2009 code has specific exemptions for attics and crawlspaces that allows the ASTM E-85 qualified foams to be sprayed without a thermal or ignition barrier, as long as the spaces are not accessed for any reason other than equipment maintenance and they require an access point by IRC code.

HOWEVER...It really all comes down to the individual inspectors interpretation. This is how our local inspectors are interpreting it in one county but not in the next one over, so to be safe most contractors are spraying an ignition barrier on all spray foam products now, which continues to drive up the cost of the quality contractors work

I do like the thermal barrier qualifier you noted, that really simplifies it when you are teaching this section. If you can walk up to it, then yes to the thermal barrier. Thanks!

Caleb,

The E-84 only test has was removed from the IRC between the 2003 & 2006 code cycle.  The exceptions you are speaking of are for THERMAL barriers not ignition!  You need an ignition barrier unless the specific foam you are using has passed either the NFPA 286, FM 4880, UL 1040, UL 723 or UL 1715 test.  NOT E-84.  This test (corner crib) has been modified in AC 377 for ignition barrier only.    Other than passing one of these tests the foam must be covered by at minimum a ignition barrier.  Please read IRC 2009 R316.5.3 & R316316.5.4  Both section require attics or crawl spaces with limited access to be protected by an ignition barrier.

The only true exception is for sill plates and headers IRC R316.5.11

I do not see how this could be "interpreted" any other way that written.

RSS

Featured Forum Discussions

What causes a temperature plane in a home

Started by Energy Wise Solutions in HVAC. Last reply by Peter Krych on Friday. 4 Replies

Velocity Pressure Testing

Started by Horace Douglas Hunt, Jr. in General Forum. Last reply by Horace Douglas Hunt, Jr. Apr 15. 2 Replies

Videos

  • Add Videos
  • View All

Latest Activity

Efficiency First California posted a blog post

Building a Clean Energy Future, Respect for the People Who Will Build It

You don’t need to spend a great of time deal in the policy world before you hear a conversation…See More
9 hours ago
Profile IconDavid G. Tamutus and Sharon Block joined Home Energy Pros
10 hours ago
Gary Reed added a discussion to the group Job Board
Thumbnail

HOME ENERGY ADVISORS WANTED (NEW YORK STATE: Saratoga & Glens Falls Region)

We are currently seeking experienced HOME ENERGY ADVISEOS to join the Jack Hall Plumbing &…See More
yesterday
Profile IconGary Reed and Kurt Shafer joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
yesterday
Ron Sarrick liked Energy Wise Solutions's discussion What causes a temperature plane in a home
yesterday
Kurt Shafer added a discussion to the group Job Board
Thumbnail

Installers for Whole House Fans in Various Cities

Invisco Whole House Fan Company in Temecula CA sells the highest performance fans in history. The…See More
yesterday
Kurt Shafer posted a blog post

First Rooftop Whole House Fan for Homes without Attics

Eichler was one of the most famous Mid Century Modern home builders in the 50s and 60s. His homes…See More
yesterday
Travis Lundberg replied to angela stanzione's discussion Used Weatherization and auditing equipment for sale in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"Do you still happen to have a blower door fan, frame and fabric still for sale?  If so please…"
yesterday

Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service