Hi Guys:

 

I'm working more recently independently and know of a few groups in SF Bay Area that are looking for home energy audit / efficiency contractor representative.  I've found meetings helpful for anyone wanting to get the word out about what you do and get some referrals going.  Meetings are usually every two weeks or some once a week.  

Just send me a quick email or call if curious and we could share ideas.

 

Regards,

Jason C.
Berkeley, CA

510-917-3150 cell
www.mysolaradvisor.com
"Making it easier for any homeowner just
to check out solar and see if it's workable
and affordable for their home -- objectively!" 

Views: 187

Reply to This

Replies to This Discussion

I used to go to Splinter Group meetings in the East Bay... tons 'o contractors...

Hi Jason,

I recently started my business in Petaluma and am trying to utilize my Hers certifications. Right now I'm certified to do residential and non-residential alterations, refrigerant charge, and new construction verifications through CalCERTS. At the end of the month I'll have the ability to do PV/Solar.

I'm interested in any bay area industry groups that might help me make contacts and increase business. Any thoughts you have on this would be useful and appreciated.

Matt - 707-766-4692 - ecoiqhome@gmail.com

Another venue are the workshops and other sorts of gatherings (typically free) at the Pacific Energy Center in San Francisco.  There are also several active Association of Energy Engineers chapters in the area that might be of interest.

Jason,

I wasn't clear if you are hosting meetings or looking for local meetings?  For the latter, try http://www.cbpca.org which also teams up with Efficiency First.  E1st may still have an SFBA Chapter.  There's also Build It Green, which has regular "guild" meetings of green building pros.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Hal Skinner replied to Hal Skinner's discussion An example of what an RCC can do with no R- insulation in the walls.
"Mornin Brett. 90 to 85, yes a slight variance there.  Same ASTM test, different scientists,…"
18 hours ago
Bret Curry replied to Hal Skinner's discussion An example of what an RCC can do with no R- insulation in the walls.
"Great information Hal. It appears the thermal emissivity in your test was .85 rather than .90. Are…"
19 hours ago
Juan Roca commented on Dale Stephens's blog post LED Lighting - Garage Door opener interference
"Hi,There is a real problem with remote controls and LED lights. However, there is a solution in the…"
yesterday
Profile IconJuan Roca and Elizabeth Coe joined Home Energy Pros
yesterday
Casey Gesell posted videos
yesterday
Gerald Shechter posted videos
yesterday
Hal Skinner replied to Hal Skinner's discussion An example of what an RCC can do with no R- insulation in the walls.
"Bret,  here are the 2 reports I referred…"
yesterday
Craig Foley shared George Kopf's discussion on Twitter
yesterday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service