Hi Guys:

 

I'm working more recently independently and know of a few groups in SF Bay Area that are looking for home energy audit / efficiency contractor representative.  I've found meetings helpful for anyone wanting to get the word out about what you do and get some referrals going.  Meetings are usually every two weeks or some once a week.  

Just send me a quick email or call if curious and we could share ideas.

 

Regards,

Jason C.
Berkeley, CA

510-917-3150 cell
www.mysolaradvisor.com
"Making it easier for any homeowner just
to check out solar and see if it's workable
and affordable for their home -- objectively!" 

Views: 187

Reply to This

Replies to This Discussion

I used to go to Splinter Group meetings in the East Bay... tons 'o contractors...

Hi Jason,

I recently started my business in Petaluma and am trying to utilize my Hers certifications. Right now I'm certified to do residential and non-residential alterations, refrigerant charge, and new construction verifications through CalCERTS. At the end of the month I'll have the ability to do PV/Solar.

I'm interested in any bay area industry groups that might help me make contacts and increase business. Any thoughts you have on this would be useful and appreciated.

Matt - 707-766-4692 - ecoiqhome@gmail.com

Another venue are the workshops and other sorts of gatherings (typically free) at the Pacific Energy Center in San Francisco.  There are also several active Association of Energy Engineers chapters in the area that might be of interest.

Jason,

I wasn't clear if you are hosting meetings or looking for local meetings?  For the latter, try http://www.cbpca.org which also teams up with Efficiency First.  E1st may still have an SFBA Chapter.  There's also Build It Green, which has regular "guild" meetings of green building pros.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Kurt Shafer replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Reading the Invisco description you will find that it is designed to be surrounded by cellulose to…"
5 hours ago
Glen Gallo replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Kurt, I think cost of operation is always a factor but I am not sure I would leave it just cfm.…"
5 hours ago

Paul DelVaglio just added their location.
(via Member Map)

6 hours ago
Paul DelVaglio posted a photo
7 hours ago
reflintorm replied to Jamie Kaye's discussion Flickering LED lights
"I think, Better to replace the dimmer switch if it is not recovered then once go through the…"
11 hours ago
Kurt Shafer replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Glen,  You are the first person who has ever told me they prefer lower CFM. What you left out…"
21 hours ago
Glen Gallo replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Tamarack has lower CFM than typical fans and has a insulated lid that automatically closes when fan…"
21 hours ago
Tom Conlon's discussion was featured

Whole House Fans - Love 'Em or Not?

I just searched this forum for "Whole House Fan", but I didn't find much about them (except …See More
23 hours ago
Tom White shared Brandon Walton's blog post on Twitter
23 hours ago
Brandon Walton's blog post was featured

12 Things Every Home Performance Contractor Should Have on Their Work Truck

Every home is unique and differs from the last. It would be a perfect world (from a project…See More
23 hours ago
Griffin Hagle replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
yesterday
Griffin Hagle replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Kurt, Whoops, looks like I got my links mixed up. Thanks for pointing that out. Here's the…"
yesterday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service