Sealing crawlspaces and insulating them with polyurethane foam

Joe Lstburek and John Tooley are both sold on sealing crawlspaces.  I saw a short bit of "Holmes Inspections" on HGTV where they sprayed 2 lb polyurethane foam directly onto the dirt floor underneath a raised kitchen addition and sealed the crawlspace essentially turning it into (semi?) conditioned space. I think they sprayed it onto the dirt, I could be mistaken.

My question is: Does it make sense to spray the foam onto the dirt so as to avoid having to install a moisture/vapor barrier, seal it with tape and them add foam on top of that and seal it with tape.

Does anyone have a good supplier of the thick white material that the East Coast companies use on their sealed crawlspaces?

Can anyone direct me to the best practices for such a project? I'm also wondering if someone has a detail for sealing and waterproofing the 12x4 vents in the stucco.

Mr. Tooley stated that sealing/insulating a crawlspace can yield a 15% energy savings. Does anyone have experience with energy savings percentages in California's Central Valley?

It seems that sealing under houses has many benefits but where are the great examples of it done right?

Thanks,

George Matthews

Views: 5354

Reply to This

Replies to This Discussion

Ground cover in the crawl space with have NO effect on foundation movement caused by soil MC. That is an exterior drainage issue.

George,

 

The sealed crawlspace concept is very popular here in North carolina and surrounding states.  The best place to go for answers to your questions is advancedenergy.org and look up in their foundation sealing section.  Some thoughts regarding your questions:

  - It does not make sense to spray foam onto the dirt.  The ground is a surprisingly good insulator.  You want to insulate the peripheral walls of the crawlspace using a code-compliant R-value foam that is approved for exposed use under the Foam Plastics section of the Califormia Residential Code.  In North Carolina, Dow Thermax Sheathing rigid insulation is by far the most popular option and was the one used by Advanced Energy when they built test residences to gauge the effectiveness of sealed crawlspaces.

  - Raven Industries is the most popular manufacturer of poly to cover the ground and flash to the piers and wall insulation.

  - Advanced Energy constructed twelve test houses and determined that a home with a sealed crawlspace should produce about 18% energy savings over a home with conventional foundation vents.  Of course, that data was generated in Eastern North Carolina and results will probably differ in the Sacramento Valley.  The good news for you is that the Advanced Energy Data suggested the bulk of the energy efficiency improvement came during the warm months so some reasonable level of savings should be expected in California.  Humidity levels may impact the amount of that savings.

 

If you have any questions, please feel free to contact medirectly to discuss further

 

Scott Cummings

Sr. Technical Service Engineer

Dow Building Solutions

Charlotte, NC

slcummings@dow.com

I have a question about how to create a termite viewing area in a PU spray foamed foundation wall.

In crawlspace encapsulation one wants to bring the thick white plastic sheet up the foundation wall and make a nice connection with the foam (my insulation contractor does anyway). In doing that how would one create an area of 4" open clear concrete to look out for termite tunnels? Has any solved this problem?

My client who is teetering on the fence about encapsulating his unpleasant smelling crawlspace is thinking of just getting terminix out to inject termite poison into the ground around the perimeter before the project.

Anybody have a great detail for both energy efficiency and termite protection/observation? Thanks!

 

 

There's a good piece on encapsulated crawl spaces here, and it almost-but-not-quite answers your question.

 

http://www.greenbuildingadvisor.com/blogs/dept/musings/building-unv...

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Bud Poll replied to Chad Mcaulife's discussion BPI QCI Cert.
"I can't think of any test I've ever taken where I wasn't able to determine what I…"
42 minutes ago
jerry gentile replied to Chad Mcaulife's discussion BPI QCI Cert.
"you are spot on my friend-- during the exam I said this is ridiculous--- I have bpi certs for…"
5 hours ago
Eric Kjelshus commented on Jeremy Begley's blog post The Home Envelope : Does it Really Matter in a Heat Loss Caculation
"IT all matters,  I lot of sealing,  A lot of air barrier.  A lot of "R" A…"
18 hours ago
Michael Dunseith posted a status
"BPI Infiltration and Duct leakage (IDL) Certified"
23 hours ago
Jeremy Begley posted a blog post
yesterday
Kim Burnett joined Sean Lintow Sr's group
Thumbnail

Best Practices (Residential)

Best Building, Retrofitting, or even Auditing Practices - what are they, what should change, what…See More
yesterday
Kent Mitchell commented on Adam Swain's blog post Top Worst Crawl Space Insulation Ideas
"Hi Adam - It sounds like you may be referring to enclosed crawlspaces - Here in the NW we've…"
yesterday
peter chang replied to Damien Greenfield's discussion Is there is cost saving for you in having a tankless water heater?
"I think it is quite possible the greatest savings will be realized by the lowest volume users. I…"
yesterday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service