"I think that most homeowners lack proper education on the proper way to achieve significant…"
Sealing crawlspaces and insulating them with polyurethane foam
Joe Lstburek and John Tooley are both sold on sealing crawlspaces. I saw a short bit of "Holmes Inspections" on HGTV where they sprayed 2 lb polyurethane foam directly onto the dirt floor underneath a raised kitchen addition and sealed the crawlspace essentially turning it into (semi?) conditioned space. I think they sprayed it onto the dirt, I could be mistaken.
My question is: Does it make sense to spray the foam onto the dirt so as to avoid having to install a moisture/vapor barrier, seal it with tape and them add foam on top of that and seal it with tape.
Does anyone have a good supplier of the thick white material that the East Coast companies use on their sealed crawlspaces?
Can anyone direct me to the best practices for such a project? I'm also wondering if someone has a detail for sealing and waterproofing the 12x4 vents in the stucco.
Mr. Tooley stated that sealing/insulating a crawlspace can yield a 15% energy savings. Does anyone have experience with energy savings percentages in California's Central Valley?
It seems that sealing under houses has many benefits but where are the great examples of it done right?
Thanks,
George Matthews
Views: 2190
Replies to This Discussion
-
Permalink Reply by David Meiland on -
Ground cover in the crawl space with have NO effect on foundation movement caused by soil MC. That is an exterior drainage issue.
-
Permalink Reply by Scott on -
George,
The sealed crawlspace concept is very popular here in North carolina and surrounding states. The best place to go for answers to your questions is advancedenergy.org and look up in their foundation sealing section. Some thoughts regarding your questions:
- It does not make sense to spray foam onto the dirt. The ground is a surprisingly good insulator. You want to insulate the peripheral walls of the crawlspace using a code-compliant R-value foam that is approved for exposed use under the Foam Plastics section of the Califormia Residential Code. In North Carolina, Dow Thermax Sheathing rigid insulation is by far the most popular option and was the one used by Advanced Energy when they built test residences to gauge the effectiveness of sealed crawlspaces.
- Raven Industries is the most popular manufacturer of poly to cover the ground and flash to the piers and wall insulation.
- Advanced Energy constructed twelve test houses and determined that a home with a sealed crawlspace should produce about 18% energy savings over a home with conventional foundation vents. Of course, that data was generated in Eastern North Carolina and results will probably differ in the Sacramento Valley. The good news for you is that the Advanced Energy Data suggested the bulk of the energy efficiency improvement came during the warm months so some reasonable level of savings should be expected in California. Humidity levels may impact the amount of that savings.
If you have any questions, please feel free to contact medirectly to discuss further
Scott Cummings
Sr. Technical Service Engineer
Dow Building Solutions
Charlotte, NC
-
Permalink Reply by George M. Matthews on -
I have a question about how to create a termite viewing area in a PU spray foamed foundation wall.
In crawlspace encapsulation one wants to bring the thick white plastic sheet up the foundation wall and make a nice connection with the foam (my insulation contractor does anyway). In doing that how would one create an area of 4" open clear concrete to look out for termite tunnels? Has any solved this problem?
My client who is teetering on the fence about encapsulating his unpleasant smelling crawlspace is thinking of just getting terminix out to inject termite poison into the ground around the perimeter before the project.
Anybody have a great detail for both energy efficiency and termite protection/observation? Thanks!
-
Permalink Reply by David Meiland on
-
There's a good piece on encapsulated crawl spaces here, and it almost-but-not-quite answers your question.
http://www.greenbuildingadvisor.com/blogs/dept/musings/building-unv...
- ‹ Previous
- 1
- 2
- Next ›
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
Tom Delconte replied to Johnny Ritzo's discussion Selecting a Water Heater"J: natural gas is the cheapest, at least until prices skyrocket. Nearly everyone has gotten rid of…"
Jeena Smith commented on Molly Banton's blog post Install a Pellet-Burning Fireplace Insert and Save Money"Fireplace burning insert must be of very good quality. It should be a combo of lower price and high…"
Johnny Ritzo posted a discussionSelecting a Water Heater
I am looking at updating the heating and water heating systems in a rental home I recently…See More
Eric Kjelshus replied to Patrick Michaelyan's discussion Hot Upper Stories"When I am asked to fix this home. I start with a Heat Loss and gain, blower door IR sq…"
Bud Poll replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans"This is a topic I have discussed many times, but unfortunately cost is all too often the deciding…"
Sean Lintow Sr replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans"If you can't talk them into replacing with IC rated...
Look into Tenmat - those are designed…"
Bachi Brunato posted a discussionBoxing and Insulating Around Non-ICAT Cans
I have a client with 16) 4" halogen recessed light fixtures in the attic.I'd like to cover the cans…See More
Dennis Heidner replied to Patrick Michaelyan's discussion Hot Upper Stories"Could you have them make a simple two line graph of the outside temperature, noting sun/clouds,…"
© 2013 Created by Lawrence Berkeley National Laboratory.
