Resnet and NATE are joining forces to Come up with yet another "Certification" a WHOLE House Specialist. Don't get me wrong, It is a very good idea to incorporate HVAC knowledge into the Energy Efficiency Game.

What will be the co$t of this new "Certification" Will it be implemented into the existing training? And why stop there. Shouldn't a Whole House Specialist have extensive Electrical knowhow? Is that circuit overloaded? Could that create a fire hazard?

As analysts, should we not warn people of potential hazards in their Home. Safety is a big selling point: carbon monoxide kills, so do fires. Will they teach the Whole House Specialist the 2012 NEC code along with ASHRAE standards and how to properly diagnose AND install improvements to your home?

Can they do HVAC calculations properly? Do combustion analysis on gas and oil fired appliances? Tell you if your A/C system is under or over charged?  It looks like this bait and switch mentality will continue on forever. 

Currently it costs $3195 to obtain a Resnet and BPI building Analyst Cert along with  Building Envelope. Heating Specialist $2145,A/C heat pump $1695, Multifamily $2095, Manufactured Housing $1795. Total so far $10,925 IN TRAINING ALONE!!!  What about Equipment? Now add $16,370.20 plus tax(10% in Chicago) $1600 for a grand total of.................

$28,895  Now go find some work   Any Comments? these are current prices Act now before it changes again

Views: 405

Reply to This

Replies to This Discussion

Ridiculous is the only explanation. Certifications and their associated fees are increasing faster than foreclosures.

Thank you

Thank you

Hurry up and get them while they're hot...in another 2 years, it will all be DOE certifications required...and I'm not guessing at their prices!

Thank you

I thought it was me

I know this sounds crazy, but you want it this way.  I said this many years ago in the IR business about training and equipment costs.  People told me I was dumb then, but now they see the effects of cheap cameras and cheaper training.  It allows everyone in the game.  

Another factor to consider is, $28k to start a business?  That is pretty cheap in the grand scheme of things.  Granted you have other expenses as well, but it is still pretty affordable.  

JJ

Good point, But with 30000 cards given out for BA those of us with proper training will be lost among the expanding generic ( and unqualified) labor force. I would like to point out that the training is mediocre at best and substandard at worst.

Phil, you've used at least a couple of other threads to bring out your soapbox. I'd appreciate it if you give it a break or take it elsewhere.

Speaking from the HVAC side of things, the ongoing complaint I've heard about NATE is that the significance of NATE certification isn't heavily marketed toward the end user, meaning building and/or equipment owners. I think more people are familiar with ASE for auto mechanics than they may be for NATE.

To me, these certifications can only have an improved ROI for those shelling out the coin for its cost if it helps to strengthen the technician/rater/auditor/etc viability in the customer's eyes. And than can only happen if the certification agencies do a better job explaining their benefit to end users, not just those in the respective industries.

Personally, as a member and officer of RSES (Refrigeration Service Engineers Society) my RSES Certificate Member (CM) certification has brought me more benefit on a professional level than my NATE heat pump certification has. I respect what the original intent of NATE was to be; to encourage improvement in the competency level of HVAC technicians. That said, if in the end it's just a way to milk technicians of cash but not also raise the level of technician competence in the public's eyes...what are we doing? Same holds true for any BPI type certification; if I as a homeowner don't know BPI from squat, what does that tell me when I'm looking to hire an auditor and he tells me about his certifications? Far as I know he could have obtained them from the equivalent of a "degree mill" institution. The implication behind a certification is that the recipient knows what he or she is doing and that I should have elevated confidence in hiring such a person. Toward the public, the worth of certification, in my estimation, has yet to be firmly established.

Yes, there are a lot of different certifications.  Do you have your RESNET spa certification?  I think the key is to identify the certification you need for your chosen area and type of work. If you are looking for the broadest, most  legitimate certification, the ICC residential and commercial certifications are the way to go.  Plus it doesn't cost an arm and leg.  From New Jersey to Texas, I've never had a code official question the ICC certification or ask what is BPI or what is RESNET?  But again, each jurisdiction and each program have their own requirement which you have to meet.  It's just ashame when you have to fly across the country to atttend some bs training session for some ridiculous organization that no one has ever heard of and probably won't be around in three years.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Trip Smith replied to Hal Skinner's discussion What an RCC can do with no R- insulation in the walls.
"Wow, that's pretty incredible. I'm curious as to what other energy upgrades he did to the…"
6 minutes ago
Tom White's video was featured

Adaptive Thermostats - Western Cooling Efficiency Center Webinar

In buildings where variations in occupancy would fool a standard programmable thermostat, new adaptive thermostats have potential for significant energy savings
1 hour ago
Hal Skinner added a discussion to the group HVAC
Thumbnail

Old ductwork efficiency file

Allison,found the attached file on ductwork efficiency on an old CD I made.  Its definitely dated. …See More
6 hours ago
Hal Skinner posted a discussion

What an RCC can do with no R- insulation in the walls.

I have had a handful of folks on this forum tell me, in effect,  that an RCC can do a very good job…See More
8 hours ago
Trip Smith posted a discussion

Where to spend my marketing dollars?

Hey everyone, I'm a new home performance company owner. (Originally a general contractor who is…See More
8 hours ago
Profile IconManuel Gutierrez, Chris Baker, Sharon Cannizzo and 1 more joined Home Energy Pros
10 hours ago
Kevin Jordan replied to Kevin Jordan's discussion air infiltration total
"thanks.  but it was just an illustration of a hole 2x2 with money going out of that…"
13 hours ago
Tom White posted a video

Adaptive Thermostats Demonstration Results Installed at UC Davis 6/26/2014

In buildings where variations in occupancy would fool a standard programmable thermostat, new adaptive thermostats have potential for significant energy savi...
16 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service