I'm looking for clarification on required ventilation levels in residential settings. For instance if I have a home that indicates an ach rate of considerably less than .35 that would suggest the addition of mechanical ventilation. I'm unclear, however on how much is enough, how much is too much? It would seem that the additional air exchange rate should be based around the actual natural rate difference between the measured amount and .35.
Tags:
Permalink Reply by Chad Robinson on August 30, 2012 at 2:39pm Michael - It is great to see that there are some folks out there thinking. Building science folks are the ones that preach you have to test before you know... But when it comes to ventilation we take a one size fits all approach. I'm sure that is why there is so much confusion about ventilation. No matter what building science type board you look at there is always an active discussion on ventilation. No one understands it because how we generally "fix" the problem does not make sense.
Thanks for giving me hope that one day we will move past prescriptive ventilation.
Permalink Reply by Jack Hampton on September 14, 2012 at 4:26am I dont know in which area you staying but If possible you can take hole from residential general contractor who will provide you free Constance services
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Tom Maides commented on Jim Gunshinan's blog post The Universe Is Made of Stories
Laurie DiDonato posted an event
Tom Delconte posted a blog post
Jim Gunshinan commented on Jim Gunshinan's blog post The Universe Is Made of Stories
Edward Foskey commented on Jim Gunshinan's blog post The Universe Is Made of Stories
Diane Chojnowski commented on Jim Gunshinan's blog post The Universe Is Made of Stories
bart laemmel commented on Jim Gunshinan's blog post The Universe Is Made of Stories© 2013 Created by Lawrence Berkeley National Laboratory.