Was asked to trouble shoot a mold issue in a Kneewall assembly.  When I arrived there was a damp and hot (+120) kneewall assembly that had no ventilation.  We corrected the mold issue by installing the proper ventilation to the assembly BUT now the client has a distinct smell that comes into the home.  Is there any way that anyone knows of to eliminate the smell?

 

As I have stated, mold has dried up, but is still there.  Ideas PLEASE

Views: 4439

Reply to This

Replies to This Discussion

Any mold remediation company would be happy to charge you big bucks to encapsulate the mold. If you are lucky, the smell is coming from the old mold. Before anything else, I'd spray everything with a 10% solution of clorox in water.

Sometimes the after odor cannot be stopped and is impossible to trace.

I would think again about applying any bleach solution to a mold issue. It can make the IAQ issue worse instead of better. I also beleive there may be a moisture issue in the kneewall space that is more than can be remediated by ventilation. Mold requires three items to survive; oxygen, water, and a cellulose based food source such as wood, drywall paper, etc. Remove one of these factors and it cannot survive. I would check for a moisture source to the attic space, bath exhaust, leak, etc. Just hot and under ventilated will not produce moisture. If the homeowner is noticing a smell, that indicates to me that you have communication between the living space and the attic, possibly allowing for condensation in the attic. Venting will increase the flow if there is communication to the living area. Zone testing will prove but will also draw the contaminated air into the house. Suggest a visual to find communication, air seal from living space, use of a microbial or non-chlorine mold or sporicide to kill existing mold (removal of the contaminated components is best but sometimes not within budget) and, if possible, use of low odor Kilz or similair product to seal any surviving spores to the surface.

A) look at waste plumbing stack if not vented to roof will make a lot of smells. B) let all bath exhaust out the roof or soffit C) water leaks roof or waste or water or steam heat system D)  do you see mold? If so take it out

Hi Tim.

Adding ventilation addresses the cause of the mold, maybe, but where the mold developed may be well beyond the kneewalls.

Where is this house located (approximately), and how many years has this mold issue been going on?  It is now a summer stack condition, so you may possible have air infiltration entering high, passing through the house, and exiting low.  That could be carrying the unwanted smell with it.

Is the house air conditioned?  Are there any air passages from basement to those kneewalls?  There are often 2 kneewalls, did both have moisture issues?  Plumbing vents often utilize kneewalls to pass up to the roof.  Check for air sealing.

Bud

I think to have mold, then there is moisture and is good if you can look at and make a thermographic survey of housing. It will serve as a preventive maintenance of the home and if there is a problem it will locate. At least with us in Bulgaria so doing. Look there's a lot of information on these issues energyaudit.bg.

I agree with Bud and Emilian, how do you know the mold problem has been corrected? Mold smells generally dissipate significantly when moisture is removed, and you should have noticed the difference scent-wise. You may be able to use a moisture meter if you can access the entire wall surface.

Try ground coffee when making an effort to get rid of a musty smell in a room. Although the smell of coffee will linger it will not remain, and it will eliminate the musty smell quickly and easily. mold south Florida

You may wish to try limeprime by earthpaint.net.

As a public adjuster in South Florida we deal with mold claims all of the time because mold is very difficult to completely remove.  In addition, as I am sure you are well aware, some molds can be harmful to the overall health of the occupants in the home or business.  However, here is a very good article from wikihow on how to remove mold and mildew smells http://www.wikihow.com/Remove-Musty-Odors.

I do encourage you to visit our company's web page on mold and water damage and why you should consider having mold professionally mitigated.

Sight unseen is always difficult. Smells are hard to trace. Whatever area was contaminated might need to be removed and replaced. When doing so this might provide access to areas unseen now. I normally diagnose cause, then repair and remove damaged drywall. With the cavity open I will use a fan or a dehumidifier to dry the area out. After the area is dry reassemble the area. Given that I am in a dry climate this works for me. As with anything each home, occupant and issue are different as are the solutions. 

RSS

Forum Discussions

Investigating 3257KWH monthly usage issue.

Started by Brent Shapiro in General Forum. Last reply by John Nicholas 11 hours ago. 6 Replies

Earn 2 BPI CEUs by Blogging for BPI

Started by Quinn Korzeniecki in General Forum on Monday. 0 Replies

What made this chimney fall down?

Started by Eric Kjelshus in General Forum. Last reply by Eric Kjelshus Jun 15. 5 Replies

Studies on Home Energy Audit Energy Savings Potential?

Started by Julie Saporito in General Forum. Last reply by Danielle Sass Byrnett Jun 15. 5 Replies

Latest Activity

John Nicholas replied to Brent Shapiro's discussion Investigating 3257KWH monthly usage issue.
"Check out the DHW unit.  What temperature is the water entering and leaving the unit?…"
11 hours ago
Brent Shapiro replied to Brent Shapiro's discussion Investigating 3257KWH monthly usage issue.
"With regard to the outside lighting - zero outside lighting, in fact the lighting in the basement…"
13 hours ago
Green ID posted blog posts
13 hours ago
Rob Buchanan posted a discussion

Building envelope and mechanical interactive effects

Good afternoon everyone,I was reviewing some of the old BPI newsletters and noticed a…See More
17 hours ago

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service