Recommended Intumescent Coatings for Polyurethane Foam Insulation

Hello folks.

I am looking for quality intumescent coatings for closed-cell spray and rigid foam insulation. 

I want to use the coatings for residential and small commercial applications.

Any advice?

Thanks in advance.

Patrick

Views: 1818

Reply to This

Replies to This Discussion

Hi Patrick,

As a consultant, I've specified products used by Demilec (http://www.demilecusa.com) for residential applications. They are manufacturers of open and closed cell spray foams, as well as intumescent coatings and other products. You can read about a few of their intumescent coatings on this page: http://www.demilecusa.com/technical-library/products

I'd recommend calling them for more information.

-Brady

Great, thanks Brady! I think this is exactly what I am looking for.

Patrick

this is a slippery slope. 

if the intumescents are tested on a foam product, then that system passes the thermal barrier requirement.  these systems are BRAND specific.  you need an ICC ESR report indicating the specific combination of a brand of foam with a brand of coating.  many foam manufacturers have relabeled a product called DC-315 as their proprietary product then tested that with their foam to get an ESR for the combination, but if you use the coating from a Demilec bucket on a Lapolla foam you technically do not have a code compliant product even if both manufacturers relabeled DC-315. 

if you Google DC-315 you can pull down data sheets from at least 6 foam manufacturers showing a combination of their foam and some relabeled variant of DC 315. you cannot get ESR's there though, you would have to go to the foam manufacturer to get those.   

Patrick,

Pat makes a good point, it definitely has to be a coating tested with a specific foam together as a system. I don't know if you are using high pressure spray foam or low pressure kits but if you are interested in a low pressure solution, Fomo Products' Handi-Foam has an intumescent coating Handi-Foam Ignition Barrier.


Learn more about it here: http://www.fomo.com/air-seal-accessories.aspx. 

There is a training module available from our partners at No Burn that goes more in depth about the type of coating you would need for your application.

Best of luck! Let me know if you have any questions.

-Leba

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

randy tolowski replied to randy tolowski's discussion Another unvented roof question
"you are correct. we won't know how these new products perform long term. I hope I get the ok…"
yesterday
randy tolowski replied to randy tolowski's discussion Another unvented roof question
"good info Sean thanks for the heads-up on calling it a sip. code approved hot roof system sounds…"
yesterday
Bud Poll replied to randy tolowski's discussion Another unvented roof question
"I've removed caulking that was over 30 years old and it outlasted the materials to which it…"
Friday
Profile IconAmanda Hallock, Kalvis, Tyler Grubbs and 6 more joined Home Energy Pros
Friday
Corbett Lunsford posted videos
Friday
Sean Lintow Sr replied to randy tolowski's discussion Another unvented roof question
Friday
randy tolowski posted discussions
Friday
Todd Collins replied to Tom Strumolo's discussion Ancient (70's) wall foam insulation, now a powder.
"What did you find about the dust?  "
Friday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service