Recommended Intumescent Coatings for Polyurethane Foam Insulation

Hello folks.

I am looking for quality intumescent coatings for closed-cell spray and rigid foam insulation. 

I want to use the coatings for residential and small commercial applications.

Any advice?

Thanks in advance.

Patrick

Views: 3339

Reply to This

Replies to This Discussion

Hi Patrick,

As a consultant, I've specified products used by Demilec (http://www.demilecusa.com) for residential applications. They are manufacturers of open and closed cell spray foams, as well as intumescent coatings and other products. You can read about a few of their intumescent coatings on this page: http://www.demilecusa.com/technical-library/products

I'd recommend calling them for more information.

-Brady

Great, thanks Brady! I think this is exactly what I am looking for.

Patrick

this is a slippery slope. 

if the intumescents are tested on a foam product, then that system passes the thermal barrier requirement.  these systems are BRAND specific.  you need an ICC ESR report indicating the specific combination of a brand of foam with a brand of coating.  many foam manufacturers have relabeled a product called DC-315 as their proprietary product then tested that with their foam to get an ESR for the combination, but if you use the coating from a Demilec bucket on a Lapolla foam you technically do not have a code compliant product even if both manufacturers relabeled DC-315. 

if you Google DC-315 you can pull down data sheets from at least 6 foam manufacturers showing a combination of their foam and some relabeled variant of DC 315. you cannot get ESR's there though, you would have to go to the foam manufacturer to get those.   

Patrick,

Pat makes a good point, it definitely has to be a coating tested with a specific foam together as a system. I don't know if you are using high pressure spray foam or low pressure kits but if you are interested in a low pressure solution, Fomo Products' Handi-Foam has an intumescent coating Handi-Foam Ignition Barrier.


Learn more about it here: http://www.fomo.com/air-seal-accessories.aspx. 

There is a training module available from our partners at No Burn that goes more in depth about the type of coating you would need for your application.

Best of luck! Let me know if you have any questions.

-Leba

RSS

Featured Forum Discussions

Too many BTU's. Too much horsepower?

Started by Steve in General Forum. Last reply by Walter Ahlgrim 12 hours ago. 3 Replies

Stack/wind pressure and flow networks.

Started by Daniel James Grundy in Training. Last reply by Daniel James Grundy 17 hours ago. 5 Replies

BDT with vermiculite in hollow CMU walls?

Started by Brad Cook in General Forum. Last reply by John Nicholas 23 hours ago. 2 Replies

Strange IR Image

Started by Larry Nissman in General Forum. Last reply by Brad Cook Mar 9. 7 Replies

Videos

  • Add Videos
  • View All

Latest Activity

Sarah OConnell posted a blog post

Crowdsourcing for Innovation

Share Your Ideas!Novel Building Envelope Design for Increased Thermal PerformanceIn 2014, more than…See More
1 hour ago
Colin de Paor is now a member of Home Energy Pros
3 hours ago
Walter Ahlgrim replied to Steve's discussion Too many BTU's. Too much horsepower?
"The 5 ton system you have is not 500 hp racecar engines they are 500 hp truck engines. The duct…"
12 hours ago
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"So I wanted to start with a basic who can help then go into more detail later. But yes find…"
17 hours ago
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"My tutor got back to me and while areas don't quite feel right a little to much assumptions…"
17 hours ago
Brennan Less replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"Daniel, I'm assuming you're trying to predict the airflows through the different openings…"
19 hours ago
Martin Newmark joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
21 hours ago
John Nicholas replied to Brad Cook's discussion BDT with vermiculite in hollow CMU walls?
"If the drywall is in good shape, you should have little worries about the 50pa depressurization…"
23 hours ago

Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service