Hi all! One of our readers sent us the following question. Can you please help him out?

"I clean air ducts and would like to expand into duct testing. What is a common fee to test for air duct leakage with a duct blaster and then what is a common charge to seal them?"


We'll pass along your answers. Thanks!

Views: 168

Reply to This

Replies to This Discussion

In all seriousness, knowing what I charge, or someone else charges isn't really going to help someone. We have a common term for that in the construction industry which is the "going out of business rate". One needs to sit down & really think about all the time involved, all of their overhead (including calibration, marketing), etc... how many they will realistically do and come up with a price. With that said, anyone that has realistically crunched the numbers for a stand-alone test is going to be around the $200 mark. Now if this is just an add on service - a while we are there, you are probably around a $100. (my page with rates: http://alagbs.com/duct-testing-alabama)

As for sealing them - good luck because it all varies on what the issue is & what it will take to get to them.

I am going to keep comments to myself on the cleaning part, but said individual will also need to address proper training & licensing

Solid advice - thank you!

The following ranges are for points of reference:

Standard fee for duct testing: $100 to $150.

Standard fee for duct sealing: $50 to $70 per man-hour. Jobs vary greatly, but a good start is the $300 to $600 range.

Hope this is a good start!

Thank you!

Not only look at sealing, but also balancing/improving/redesigning as needed. Many homes have hot/cold rooms and homeowners would love to get them fixed so they can use those rooms again. Keep in mind it's typically the lowest bidder that initially did the initial duct install, so few are done correctly.

I'll pass along - thank you!

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.

Latest Activity

Eric Kjelshus replied to Johnny Ritzo's discussion Selecting a Water Heater
"I have been using  Rheem or State or Brad/white PVC flued tank type hot water heater…"
11 hours ago
Bachi Brunato replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
"As it turns out, we have 10 Halo 99RT housings with Halo 998P Eyeball trim in the kitchen. The trim…"
14 hours ago
Bachi Brunato's discussion was featured

Boxing and Insulating Around Non-ICAT Cans

I have a client with 16) 4" halogen recessed light fixtures in the attic.I'd like to cover the cans…See More
15 hours ago
Johnny Ritzo's discussion was featured

Selecting a Water Heater

I am looking at updating the heating and water heating systems in a rental home I recently…See More
15 hours ago
George Kopf's discussion was featured

Misting Aeroseal in Pressurized Home = Amazing Air Sealing Innovation

As a training program manager for a non-profit, I am often too busy managing my program to catch…See More
15 hours ago
Tom Delconte's blog post was featured
15 hours ago
Christopher Morin's blog post was featured

Selling with Rebates: The Simple Payback

  The easiest way to show a homeowner how their investment in high-efficient equipment will help…See More
15 hours ago
Edward Foskey's blog post was featured
15 hours ago
Mike Rogers's blog post was featured

HOMES Act introduced with Bi-Partisan Sponsorship

We don't see a lot of bi-partisan bills in Congress these days. Here's one focusing on home…See More
16 hours ago
Mike Rogers posted a blog post

HOMES Act introduced with Bi-Partisan Sponsorship

We don't see a lot of bi-partisan bills in Congress these days. Here's one focusing on home…See More
19 hours ago
David Eggleton replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"That varies, as policies are different from state to state."
19 hours ago
Orvil D Boyer replied to David Starrett's discussion I am looking for a good IR camera in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"I have a Fluke TIR 32.  Used aproximately 10 times 1.5 yrs old.  This is the first…"
19 hours ago

© 2013   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service