New LBNL Resource: Steps to Improving Ventilation in Existing Homes

http://resaveguide.lbl.gov/

Context: This work was done under RESAVE, a California Energy Commission (CEC) Public Interest Energy Research (PIER) Program. The overall goal of this program is to facilitate the reduction of energy and peak power spent in homes to condition air that enters from outdoors. Infiltration, the uncontrolled exchange of air through leaks and penetrations, typically accounts for over one-third of the total space conditioning energy. New homes typically spend the same fraction of energy on mechanical ventilation. This program aims to reduce ventilation and infiltration related peak load and energy costs by 25-50%.

This program will provide important research and technical tools to advance the strategy of "Build Tight, Ventilate Right". This approach combines high-quality building construction (low leakage, low emitting materials, etc.) with optimized ventilation systems to maximize energy efficiency while maintaining acceptable indoor air quality (IAQ). The program will develop new technologies and recommendations for improvements to existing technologies. The involvement of industrial partners in the program will ensure that these technological developments find their way into California homes. The program will leverage best practices and leading-edge building and ventilation technologies from California, the United States, Japan and Europe. A specific goal will be the optimization of hybrid, passive and active ventilation systems to facilitate their adoption in California homes. In addition to technology development, this program will make recommendations for changes to California State Energy Code for buildings (Title 24) together with providing the diagnostic and commissioning tools necessary to ensure code compliance. These tools will also help in market transformation by demonstrating the performance and value of good ventilation systems to consumers, contractors, building managers and other potential decision makers and beneficiaries.

Views: 446

Reply to This

Replies to This Discussion

just wanted to thank you for the information I have downloaded the pdf

New technology will continue to bend the curve on these models. Vermont Energy Investment Corp (VEIC), Northwest Energy Efficiency Alliance (NEEA)  and others are developing these models, with HRVs/ERVs operating at .3 watts/cfm and with 90% ASE efficiencies as the basis for dramatically increased energy efficiency, comfort and IAQ. Additionally, NEEA has commissioned a residential ventilation study that should shed some light on the efficacy of ventilation schemes in various levels of tightness in these homes. I think that this will be one of the most significant conversations with regards to DER, NZE, retrofit and other programs in coming months. 

Washington state is taking commentary on their adoption of new codes, and this subject is the one that is garnering the most attention right now as well. The NEEA study was prematurely referenced in a recent blog, as the study is just getting under way, and "results" were reported already. 

LBL and other organizations studying this issue will be critical to avoiding unintended consequences that often follow new code requirement when the science has not yet caught up with the code. We can learn a lot from Europe, where they went down this road already, and in specific markets they made the same mistakes that we seem determined to make as well. 

RSS

Videos

  • Add Videos
  • View All

Twitter

Latest Activity

Empower Efficiency added a discussion to the group Job Board
Thumbnail

Position Opening: Local Community Outreach Specialist, Energy Efficiency (San Carlos, CA)

Local Community Outreach Specialist, Energy Efficiency (San Carlos, CA) Job Title: Local Community…See More
yesterday
Amber Vignieri posted a blog post

Elevate Energy Mythbusters: Windows & Attics Edition

This blog post is guest written by former staff member Eric Keeley.Great enthusiasm for home energy…See More
yesterday
Glen Gallo replied to Diane Chojnowski's discussion Poll: What is you favorite or most important home performance diagnostic or measurement tool?
"I agree with Ted. If I could bring just one piece of equipment it would be the blower door. It has…"
yesterday
Glen Gallo replied to Shaun 's discussion Commercial duct testing
"If above the ceiling tiles the wall is a finished assembly and there is insulation on or under the…"
yesterday
Tom White's video was featured

Combustion Appliance Zone Testing (CAZ) Made Easy (March 24, 2016)

Combustion Appliance Zone Testing (CAZ) Made Easy (March 24, 2016) -Gauge Fundamentals -Adapting to the new BPI standard -RESNET testing requirements -NFPA testing requirements -Best practices for best results
yesterday
Profile IconLaura Capps and Bret Abrams joined Home Energy Pros
Thursday
Olivia Taylor posted a blog post

5 Key Reasons Why Rooftop Solar Is Popular In The US

The rapid switch from traditional electricity to clean, economical and renewable solar energy is…See More
Thursday
Adam Swain posted a blog post

Top 5 Tips For Hiring A Crawl Space Contractor

A homes crawl space is one of the few places most homeowners try to avoid at all cost, and for good…See More
Wednesday

© 2016   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service