A "National" Certification Mill Expelled by BPI

BPI's requirement of Video taping proctored tests appears to have scored if not its first, but its Biggest Culprit. A well known, if not respected, National Training Mill has lost its BPI Test Center Status. Why?, ... well that is obvious to any legitimate Test Center. The Fly In / Fly Out method of "Training" does not stand up to scrutiny. I hope that more group members that are 'In the Know" are more willing in the future, to comment on similar examples of training fraud & failure. Only by shining the light on such Training Mills will our industry ever rid itself of such Charletan's.

Tags: Analyst, BPI, Building, Center, Test, Training

Views: 1790

Reply to This

Replies to This Discussion

It was only a matter of time.....

AHA!!! I called  this months ago. FANTASTIC (I called it a puppy mill) BRAVO A step in the right direction.

Ok I will bite - who got expelled & where's the press release?

Me too

Can't say right now. It is a "National" company and I'm sure you can figure it out. 

Geary, in fairness to all of the companies doing things correctly, you need to find a way to identify the company or you shouldn't have mentioned it in the first place.  As you have it now, ALL are suspect and that's probably not what you intended.

Bud

Agreed. This is either a leak or a rumor until BPI confirms. Who is your source?

Well it appears to be Clean Edison as they are no longer listed but... I don't see any press releases or any other confirmation so is it just a computer error & an overactive imaginations or legit? Of course even if true, just because they can't test doesn't mean that they cant "teach" still

Only BPI can confirm or deny the allegation.  BPI we're waiting Don't pull a romney we want to know

It got confirmed via David Butler about 2 hours ago after he called BPI directly (Linked In discussion). With that said it would be nice if BPI would comment or release a statement, especially for one of this magnitude. Along those lines I have to side with Bud that this thread or any other one should never have been posted in the first part without the name

I just spoke with someone from clean edison in new york. They said they were still testing training etc. I then directed him to the discussion on Linkedin and said I did not want to see their business affected if this were not true. He said he would address the situation. give them a chance to respond to the allegations. Just waiting on their response.

Here is the latest BPI press release, including this excerpt:

"...BPI has been able to pinpoint and document problem areas, leading to the decommissioning of one test center and one proctor in order to maintain the integrity of BPI's certifications. A full list of organizations and individuals whose contracts have been terminated, as well as a list of test centers and proctors that have chosen not to renew their contracts with BPI, will be made available in early September."


Bravo to BPI. Hard as it is to do, this is what it takes.

RSS

Featured Forum Discussions

Too many BTU's. Too much horsepower?

Started by Steve in General Forum. Last reply by Walter Ahlgrim 19 hours ago. 3 Replies

Stack/wind pressure and flow networks.

Started by Daniel James Grundy in Training. Last reply by Daniel James Grundy 23 hours ago. 5 Replies

BDT with vermiculite in hollow CMU walls?

Started by Brad Cook in General Forum. Last reply by John Nicholas yesterday. 2 Replies

Strange IR Image

Started by Larry Nissman in General Forum. Last reply by Brad Cook Mar 9. 7 Replies

Videos

  • Add Videos
  • View All

Latest Activity

Sarah OConnell posted a blog post

Crowdsourcing for Innovation

Share Your Ideas!Novel Building Envelope Design for Increased Thermal PerformanceIn 2014, more than…See More
7 hours ago
Colin de Paor is now a member of Home Energy Pros
9 hours ago
Walter Ahlgrim replied to Steve's discussion Too many BTU's. Too much horsepower?
"The 5 ton system you have is not 500 hp racecar engines they are 500 hp truck engines. The duct…"
19 hours ago
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"So I wanted to start with a basic who can help then go into more detail later. But yes find…"
23 hours ago
Daniel James Grundy replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"My tutor got back to me and while areas don't quite feel right a little to much assumptions…"
23 hours ago
Brennan Less replied to Daniel James Grundy's discussion Stack/wind pressure and flow networks.
"Daniel, I'm assuming you're trying to predict the airflows through the different openings…"
yesterday
Martin Newmark joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
yesterday
John Nicholas replied to Brad Cook's discussion BDT with vermiculite in hollow CMU walls?
"If the drywall is in good shape, you should have little worries about the 50pa depressurization…"
yesterday

Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service