A couple of weeks ago at the ACI Conference I was afforded the opportunity to present at a Building America Expert Meeting for the discussion on Determining Air Change Rates in Envelope Leakage in Attached Dwellings.  Specifically my presentation covered the Feasibility and Futures of Infiltration Testing on Low-Rise Multifamily Housing where I was able to share how we at NRCERT have been able to audit and specifically perform infiltration testing on Low-Rise Multifamily (LRMF) housing and discuss the quantity and quality of the data we've been able to collect by doing so.

At the end of the presentation, several people in the meeting room expressed interest in reviewing a sampling of the data we can provide.  In the chance that anyone viewing on the streaming webinar at that time would like to take a look at a sampling of our data, or anyone particularly interested in the subject matter, I would like to include you in the discussion.

If you respond to this thread with your contact information, I would be happy to share this data on LRMF infiltration test results with you.

Cheers!

Chase Counts

Trainer, New River Center for Energy Research & Training (NRCERT)

ccounts@chpc2.org

www.nrcert.org

Tags: Air, Attached, Envelope, Infiltration, Leakage, Low-Rise, Multifamily

Views: 496

Reply to This

Replies to This Discussion

Chase,

Please share this information with me. I appreciate it.

Kind regards,

Amanda Ayoub

PECI

AAyoub@peci.org

503-467-0902

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Jerry Lawrence posted events
16 hours ago
Morgan M Audetat replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Right you are. You have to ask: what will the cellulose contribute.  Here in Minneapolis we…"
18 hours ago
Morgan M Audetat replied to Tony Hicks's discussion Slab-on-grade Insulation
"All slabs float. We have been installing radiant floors on various slab constructions since the…"
18 hours ago
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"2" XPS foam. I'd love an R-20. Having foam thick enough to get an R-20 would be…"
18 hours ago
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"Sorry, I did missed the "siding nailed directly to the framing", my grandfather would…"
19 hours ago
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"My own farm house is sided with 1/2" t&g pine boards and vinyl. We foamed then from the…"
19 hours ago
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"Great thought! I think that would work. I'll have to put the cost together and see where I…"
20 hours ago
Danny Gough replied to Tony Hicks's discussion Slab-on-grade Insulation
"This is a tough detail because the foam on the edge of a slab doesn't provide sufficient…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service