Welcome to all HEP members that are working on or are interested in the energy efficiency issues in multifamily residential.  We've created a Multifamily Buildings Group to help us all connect and discuss the often neglected energy issues in this type of residential housing. 

Norm

Views: 90

Reply to This

Replies to This Discussion

It would be great to hear about measures and tools for common areas as well.
Jennifer - would be very useful to hear about modeling tools (what works; what's needed....)

Evan,

 

I am also doing a Short Course at Affordable on weatherizing apartment buildings. We are doing a LOT of common area work in our program, and I'll report on that.

 

What we are doing in common areas is mostly lighting and supply air. The hallway pressurization supply air is a BIG deal; since it can be a huge cold-climate energy load, we sometimes find it disabled so the owner could save on utility bills. If the building is leaky enough, it doesn't matter a whole lot that it's been shut off. But we are doing two buildings with significant moisture concerns. In one building, pretty much my only objective was to get the ventilation started back up while keeping the utility bills stable.

Great.  Also interested in non-habitational spaces like rec rooms, pools, laundry, etc....  Any efforts there?

Interesting discussion here about multi-family vis-a-vis the new Better Buildings initiative

 

http://homeenergypros.lbl.gov/profiles/blogs/why-president-obamas-b...

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Steven Lewis replied to William Fisher's discussion Can tankless water heaters provide hot water even when the groundwater is fairly cold?
"Look at reducing the ambient humidity in the home.  The dew point is the key to the…"
yesterday
Olivia Taylor posted blog posts
yesterday
norman farwell replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Ha, we're on the same wavelength.  That's the big question--I'm still thinking…"
yesterday
Bryan Pringle replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Thanks Norm, we'll have a couple of case studies when all is said and done. Just curious, do…"
yesterday
norman farwell replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Bryan,  I am trying the same thing for most of the same reasons and also against advice to the…"
yesterday
Morgan M Audetat commented on Sean McLoughlin's blog post Programming in-floor electric radiant heat, is it worth it?
"You would need a large bathroom to see the difference. We install them both ways depending on the…"
yesterday
Dennis Heidner commented on Sean McLoughlin's blog post Programming in-floor electric radiant heat, is it worth it?
"The key is that this is the bathroom.  Occupancy is not constant.  It is more likely used…"
yesterday
Charles Cormany commented on Sean McLoughlin's blog post Programming in-floor electric radiant heat, is it worth it?
"I have seen resistance floor heaters add nearly $100 per month to an electric bill. Since most…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service