"Ben, the German highway system concept actually started BEFORE Nazi Germany during the…"
installing automatic door sweeps
Can anybody tell me if automatic door sweeps can be cut to size? I see some that are 36" long but I need to install one on a 30" basement door. I'm looking for the kind that can be screwed to the inside surface of the door and springs up at an angle when the door is open. There are a couple of brands I see (Frost King & M-D Building Prod.) but I can't really find info on how to install them. Thanks
Views: 186
Replies to This Discussion
-
Permalink Reply by David Meiland on -
Take a look at Pemko. They have good technical info on their site. The 4301 model may be what you want, available as short as 18".
-
Permalink Reply by Robert D York Jr on -
I have used different models throughout the years. Love 'em. They can be cut to any size you want with a hack saw.
-
Permalink Reply by Jose Macho on
-
Must be cut with a hacksaw so that the hinge is not damaged. Biggest problem is placement of the closing cam on the stop trim- using the supplied larger screw may split the stop trim molding so the cam cannot stay on securly so drill a pilot hole or use a smaller diameter screw.
-
Permalink Reply by Kari Sauder on -
thanks to all -- I did find what I was looking for on the Pemko site the second look around and --- I'll remember to install the cam with a pilot hole --- thanks!
-
Permalink Reply by Colin Choney on
-
I would contact the folks at MD Building products and find out what your options are. Their website is mdteam.com
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
Stan Kuhn replied to Patrick Michaelyan's discussion Hot Upper Stories"You note overheating on the south side (naturally.) Assuming the typical roof overhang of…"
Patrick Michaelyan replied to Patrick Michaelyan's discussion Hot Upper Stories"Thanks a lot Ed. And thanks to all who have added their two cents.
I think I know where to take…"
Ed Minch replied to Patrick Michaelyan's discussion Hot Upper Stories"We have successfully treated this same problem in perhaps 1000 of this same house in the…"
Craig Savage commented on Craig Savage's video
What is a Heat Pump Water Heater
"Hello Tom
We are working with A.O. Smith, GE and Stiebel Eltron on a Building America task to…"
Tom Delconte commented on Craig Savage's videoWhat is a Heat Pump Water Heater
"Craig: I was serious, since my propane price jumped from .98 to 1.85! according to everyone the GE…"
Ben Jacobs replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"I think that government support for good ideas results in major benefits over the long haul.
Please…"
Craig Savage commented on Craig Savage's videoWhat is a Heat Pump Water Heater
"Hello Tom
Not sure if you are being sarcastic, but a serious answer would be that GE is selling…"
Tom Delconte commented on Craig Savage's videoWhat is a Heat Pump Water Heater
"Craig: do you have a diagram of one that will run longer than one year? They don't really seem…"
Cory Chovanec replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans"All good points brought up. My advice is not to leave the lights. When you said halogen I think…"
Jon Haehnel replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"The first 2 answers by Tom and Sean jive with my thinking and experience. Thank you Don for…"
Tom Smith replied to Patrick Michaelyan's discussion Hot Upper Stories"The most bang for your buck will come from airsealing the attic plane and sealing the…"
© 2013 Created by Lawrence Berkeley National Laboratory.
