installing automatic door sweeps
Can anybody tell me if automatic door sweeps can be cut to size? I see some that are 36" long but I need to install one on a 30" basement door. I'm looking for the kind that can be screwed to the inside surface of the door and springs up at an angle when the door is open. There are a couple of brands I see (Frost King & M-D Building Prod.) but I can't really find info on how to install them. Thanks
Views: 198
Replies to This Discussion
-
Permalink Reply by David Meiland on -
Take a look at Pemko. They have good technical info on their site. The 4301 model may be what you want, available as short as 18".
-
Permalink Reply by Robert D York Jr on -
I have used different models throughout the years. Love 'em. They can be cut to any size you want with a hack saw.
-
Permalink Reply by Jose Macho on
-
Must be cut with a hacksaw so that the hinge is not damaged. Biggest problem is placement of the closing cam on the stop trim- using the supplied larger screw may split the stop trim molding so the cam cannot stay on securly so drill a pilot hole or use a smaller diameter screw.
-
Permalink Reply by Kari Sauder on -
thanks to all -- I did find what I was looking for on the Pemko site the second look around and --- I'll remember to install the cam with a pilot hole --- thanks!
-
Permalink Reply by Colin Choney on
-
I would contact the folks at MD Building products and find out what your options are. Their website is mdteam.com
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
Tom Mallard just added their location.
Meagan Foster posted eventsHomes 401: Green Rater Training
August 15, 2013 to August 16, 2013BPI Building Analyst Field Training
September 9, 2013 to September 12, 2013BPI Building Analyst Field Training
July 15, 2013 to July 18, 2013
Meagan Foster updated an eventEnergyLogic's RaterFest! at Black Hawk, CO
September 13, 2013 at 10am to September 15, 2013 at 12pm
Join us for one of the best home energy conferences available! This retreat will provide…See More
Meagan Foster updated an eventHomes 401: Green Rater Training at Berthoud, CO
June 25, 2013 to June 26, 2013
This highly interactive workshop builds upon the material presented in the online course, further…See More
Meagan Foster updated an eventHERS Rater Training - Online at Online
July 1, 2013 to July 26, 2013
NEW - our great RESNET HERS Rater online training is now completely self-paced, so you can start at…See More
Meagan Foster updated an eventBPI Building Analyst Training - Online at Online
June 3, 2013 to June 28, 2013
Join the EnergyLogic Academy for our BPI BA online training - we just went to a completely open…See More
Anna Svensson posted a discussionLooking for residential building and remodeling experts
Making sure you residential building and remodeling professionals out there are aware of the call…See More
Bryce Cramer replied to Mike Kandel's discussion June's Stump the Chump: What's Wrong with this Picture? in the group Building Performance Institute (BPI)"Key is this was done in warm weather. The back wall of the room was also uninsulated, but the lower…"
Bryce Cramer joined Leslie McDowell, BPI's group
Building Performance Institute (BPI)
BPI is the nation's premier standards development, quality assurance and credentialing organization…See More
James Hatheway added a discussion to the group Job Board
Quality Assurance Verification Specialist - Little Rock, Arkansas
CLEAResult (clearesult.com) is looking for a QA Verification professional who wants to leverage…See More
© 2013 Created by Lawrence Berkeley National Laboratory.
