"Do you think "problem" with Halogens because you can't retrofit a Halogenwith…"
installing automatic door sweeps
Can anybody tell me if automatic door sweeps can be cut to size? I see some that are 36" long but I need to install one on a 30" basement door. I'm looking for the kind that can be screwed to the inside surface of the door and springs up at an angle when the door is open. There are a couple of brands I see (Frost King & M-D Building Prod.) but I can't really find info on how to install them. Thanks
Views: 185
Replies to This Discussion
-
Permalink Reply by David Meiland on -
Take a look at Pemko. They have good technical info on their site. The 4301 model may be what you want, available as short as 18".
-
Permalink Reply by Robert D York Jr on -
I have used different models throughout the years. Love 'em. They can be cut to any size you want with a hack saw.
-
Permalink Reply by Jose Macho on
-
Must be cut with a hacksaw so that the hinge is not damaged. Biggest problem is placement of the closing cam on the stop trim- using the supplied larger screw may split the stop trim molding so the cam cannot stay on securly so drill a pilot hole or use a smaller diameter screw.
-
Permalink Reply by Kari Sauder on -
thanks to all -- I did find what I was looking for on the Pemko site the second look around and --- I'll remember to install the cam with a pilot hole --- thanks!
-
Permalink Reply by Colin Choney on
-
I would contact the folks at MD Building products and find out what your options are. Their website is mdteam.com
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
Cory Chovanec replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans"All good points brought up. My advice is not to leave the lights. When you said halogen I think…"
Jon Haehnel replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"The first 2 answers by Tom and Sean jive with my thinking and experience. Thank you Don for…"
Tom Smith replied to Patrick Michaelyan's discussion Hot Upper Stories"The most bang for your buck will come from airsealing the attic plane and sealing the…"
John Rising replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans"Hi Bachi,
We have done many projects where we have installed boxes around recessed lights to…"
Isaac Savage's event was featured
Duct Testing Training & Certification ONLINE - 2009/2012 IECC Code Compliance at Online
February 11, 2013 to February 11, 2014
Craig Savage's video was featuredWhat is a Heat Pump Water Heater
A simple animation describing how a heat pump water heater works
Nick Helmholdt replied to Joshua Knittel's discussion Google Thermal View? in the group INFRARED THERMOGRAPHY USERS"Any bets on how long it will take this company to land in court?
A local energy efficiency group in…"
Matthew Redmond posted a status"Full house for NYSWDA's ASHRAE 62.2 course today. A lot of discussion on implementing this standard on NY State's diverse housing stock."
© 2013 Created by Lawrence Berkeley National Laboratory.
