Can anybody tell me if automatic door sweeps can be cut to size?  I see some that are 36" long but I need  to install one on a 30" basement door.  I'm looking for the kind that can be screwed to the inside surface of the door and springs up at an angle when the door is open.  There are a couple of brands I see (Frost King & M-D Building Prod.) but I can't really find info on how to install them.  Thanks

Tags: door, sweeps

Views: 185

Reply to This

Replies to This Discussion

Take a look at Pemko. They have good technical info on their site. The 4301 model may be what you want, available as short as 18".

I have used different models throughout the years. Love 'em. They can be cut to any size you want with a hack saw.

Must be cut with a hacksaw so that the hinge is not damaged. Biggest problem is placement of the closing cam on the stop trim- using the supplied larger screw  may split the stop trim molding so the cam cannot stay on securly so drill a pilot hole or use a smaller diameter screw.

thanks to all -- I did find what I was looking for on the Pemko site the second look around and --- I'll remember to install the cam with a pilot hole --- thanks!

I would contact the folks at MD Building products and find out what your options are.  Their website is mdteam.com

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.

Latest Activity

Joe Huang posted a discussion

White Box Technologies launches Web-based weather data for building energy simulations

White Box Technologies is pleased to announce under agreement with ASHRAE the launch of WBT Weather…See More
39 minutes ago
Tom Delconte commented on Tom Delconte's blog post Lykans $29, Vampires $0 !
"Bill: these are available for free at www.freeenergy.com . Just ask for Jen Guarater! I…"
59 minutes ago
Joseph Lamy commented on Jim Gunshinan's blog post The Universe Is Made of Stories
"My life changed when I got 'ductalatored' - became familiar with proper sizing guides for…"
1 hour ago
J.C. Martel replied to J.C. Martel's discussion Disasters & sustainable energy
"Thanks Dennis."
2 hours ago
Judi Lyall joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
14 hours ago
Judi Lyall replied to David Starrett's discussion I am looking for a good IR camera in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"Hi there I am selling my equipment and have a great Fluke TIR for sale for 3600.00    If…"
14 hours ago
William H Nickerson commented on Tom Delconte's blog post Lykans $29, Vampires $0 !
"66 watts a/sec  -3960 w/min   237600 w/hr   5702400  w/day …"
18 hours ago
tedkidd commented on Jim Gunshinan's blog post The Universe Is Made of Stories
"I think Tom is busting your chops Jim.  The "drivel" part may not have been well…"
21 hours ago
Tom Maides commented on Jim Gunshinan's blog post The Universe Is Made of Stories
"Some of the best scientists of the previous 1000 years were also leaders in the Church.  Aside…"
23 hours ago
Laurie DiDonato posted an event

HERS Rater Training in Massachusetts at Maki Building Center

June 3, 2013 to June 8, 2013
6-Day HERS Rater Training- The first step to becoming a HERS RaterLast Week To Register!Your Cost…See More
yesterday
Tom Delconte posted a blog post

Lykans $29, Vampires $0 !

Just wondered, does anyone know of a better looking intelligent managed power strip?…See More
yesterday
Tom Delconte posted discussions
yesterday

© 2013   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service