A quick poll to see how widespread smart meter technology has become.

What type of power meter do you have, and how does your utility use the technology?

a: Analog dial meter

b: Digital, but not a "smartmeter".

c: Smartmeter, no advanced features enabled.

d: Smartmeter, remote reading for billing

e: Smartmeter, remote reading for utility and consumer (consumer can log in to website and see daily use)

f: Smartmeter, Time of use/variable/demand rates available, but not forced.

g: Smartmeter, Time of use/variable/demand rates ONLY, no flat rate option.

Our utility is "f", variable rates available, but not forced. We can also read our meter online.

Views: 339

Reply to This

Replies to This Discussion

PECO/Exelon Philadelphia region: analog dial meter with remote reading sensor.

D apparently moving to E by year end

No smart meter yet, Pacific Power, Oregon. The wheel is still going around and around.

PG&E Smartmeter, remote reading for utility and consumer (consumer can log in to website and see daily use). I'm pretty certain TOU/demand/variable rates are available for residential customers, but you can check their rate programs by going to their website pge.com

B with about 5% of my clients in the greater Albuquerque/Santa Fe areas. The remaining are A. PNM is the utility. Most residences are fixed rates but commercial properties tend to fluctuate between three rate plans depending on their demand and total kWh usage.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Jerry Lawrence posted events
11 hours ago
Morgan M Audetat replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Right you are. You have to ask: what will the cellulose contribute.  Here in Minneapolis we…"
13 hours ago
Morgan M Audetat replied to Tony Hicks's discussion Slab-on-grade Insulation
"All slabs float. We have been installing radiant floors on various slab constructions since the…"
13 hours ago
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"2" XPS foam. I'd love an R-20. Having foam thick enough to get an R-20 would be…"
13 hours ago
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"Sorry, I did missed the "siding nailed directly to the framing", my grandfather would…"
14 hours ago
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"My own farm house is sided with 1/2" t&g pine boards and vinyl. We foamed then from the…"
14 hours ago
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"Great thought! I think that would work. I'll have to put the cost together and see where I…"
15 hours ago
Danny Gough replied to Tony Hicks's discussion Slab-on-grade Insulation
"This is a tough detail because the foam on the edge of a slab doesn't provide sufficient…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service