A quick poll to see how widespread smart meter technology has become.

What type of power meter do you have, and how does your utility use the technology?

a: Analog dial meter

b: Digital, but not a "smartmeter".

c: Smartmeter, no advanced features enabled.

d: Smartmeter, remote reading for billing

e: Smartmeter, remote reading for utility and consumer (consumer can log in to website and see daily use)

f: Smartmeter, Time of use/variable/demand rates available, but not forced.

g: Smartmeter, Time of use/variable/demand rates ONLY, no flat rate option.

Our utility is "f", variable rates available, but not forced. We can also read our meter online.

Views: 253

Reply to This

Replies to This Discussion

PECO/Exelon Philadelphia region: analog dial meter with remote reading sensor.

D apparently moving to E by year end

No smart meter yet, Pacific Power, Oregon. The wheel is still going around and around.

PG&E Smartmeter, remote reading for utility and consumer (consumer can log in to website and see daily use). I'm pretty certain TOU/demand/variable rates are available for residential customers, but you can check their rate programs by going to their website pge.com

B with about 5% of my clients in the greater Albuquerque/Santa Fe areas. The remaining are A. PNM is the utility. Most residences are fixed rates but commercial properties tend to fluctuate between three rate plans depending on their demand and total kWh usage.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.

Latest Activity

Johnny Ritzo posted a discussion

Selecting a Water Heater

I am looking at updating the heating and water heating systems in a rental home I recently…See More
1 hour ago
Eric Kjelshus replied to Patrick Michaelyan's discussion Hot Upper Stories
"When I am asked to fix this home.   I start with a Heat Loss and gain, blower door IR  sq…"
3 hours ago

Edward Foskey just added their location.
(via Member Map)

8 hours ago
Profile IconMartin Easley and Richard Vito joined Home Energy Pros
12 hours ago
Bud Poll replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
"This is a topic I have discussed many times, but unfortunately cost is all too often the deciding…"
16 hours ago
Sean Lintow Sr replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
"If you can't talk them into replacing with IC rated... Look into Tenmat - those are designed…"
16 hours ago
Bachi Brunato posted a discussion

Boxing and Insulating Around Non-ICAT Cans

I have a client with 16) 4" halogen recessed light fixtures in the attic.I'd like to cover the cans…See More
22 hours ago
Dennis Heidner replied to Patrick Michaelyan's discussion Hot Upper Stories
"Could you have them make a simple two line graph of the outside temperature, noting sun/clouds,…"
yesterday
Bob Blanchette replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"You make some valid points, especially with the base rate charges. Increasing the base rate instead…"
yesterday
Bob Blanchette replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"Amen, make energy show it's true cost instead of subsidizing it. We have some of the lowest…"
yesterday
Dennis Heidner replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"The press report really doesn't give enough information to clearly answer why  they are…"
yesterday
Edward Foskey commented on Edward Foskey's blog post Preparing to Update the Heat Pump
"Gustavo, Thanks for the input. I agree with you in that I will be waiting till my system's…"
Saturday

© 2013   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service