A quick poll to see how widespread smart meter technology has become.

What type of power meter do you have, and how does your utility use the technology?

a: Analog dial meter

b: Digital, but not a "smartmeter".

c: Smartmeter, no advanced features enabled.

d: Smartmeter, remote reading for billing

e: Smartmeter, remote reading for utility and consumer (consumer can log in to website and see daily use)

f: Smartmeter, Time of use/variable/demand rates available, but not forced.

g: Smartmeter, Time of use/variable/demand rates ONLY, no flat rate option.

Our utility is "f", variable rates available, but not forced. We can also read our meter online.

Views: 368

Reply to This

Replies to This Discussion

PECO/Exelon Philadelphia region: analog dial meter with remote reading sensor.

D apparently moving to E by year end

No smart meter yet, Pacific Power, Oregon. The wheel is still going around and around.

PG&E Smartmeter, remote reading for utility and consumer (consumer can log in to website and see daily use). I'm pretty certain TOU/demand/variable rates are available for residential customers, but you can check their rate programs by going to their website pge.com

B with about 5% of my clients in the greater Albuquerque/Santa Fe areas. The remaining are A. PNM is the utility. Most residences are fixed rates but commercial properties tend to fluctuate between three rate plans depending on their demand and total kWh usage.

RSS

Videos

  • Add Videos
  • View All

Twitter

Latest Activity

Kobus Niemand commented on Alfie Davis's blog post Ways to Give Your Kitchen a Beautiful Makeover
"I got some new black and white granite tops to replace the old laminated stuff. They really change…"
1 hour ago
Kobus Niemand commented on Home Energy Magazine's blog post Natural Gas is Becoming Less Attractive
"Well after the greatest natural disaster in human history, who can blame…"
1 hour ago
Kobus Niemand commented on Alfie Davis's blog post Chic New Trends in Kitchen Renovation
"Nice tips! Thanks for the recommendations! With tiles for the kitchen, do you go with dark or light…"
1 hour ago
Alfie Davis posted a blog post
6 hours ago
Profile IconAlfonso Scott, Susan Benford, HomeWiz and 2 more joined Home Energy Pros
18 hours ago
Hannah Wood added a discussion to the group Building Performance Institute (BPI)
Thumbnail

Healthy Home Evaluator (HHE) certification + recorded webinar

Thanks to those of you who joined BPI's webinar on the Healthy Home Evaluator certification…See More
18 hours ago
Michelle Usher posted a blog post

Addison Homes Wins Pinnacle Award for Best Achievement in Energy Efficiency

Addison Homes was amongst the home building industry’s best and brightest honored with a 2016…See More
19 hours ago
Eric Kjelshus replied to Beverly Lerch's discussion Fireplace drafts
"A brick chimney will take some 70,000 BTU's to heat up to draft on a fireplace.   A…"
yesterday

© 2016   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service