Historic windows present challenges when it comes to mitigating the effects of UV and thermal transfer. Providing both UV and thermal barriers for historic windows is often accomplished via some ancillary attachment. Here are a few examples, with associated pros and cons:

 

Insulated roller shades
- Can protect against UV while still allowing natural ventilation

- Can sometimes be concealed when not drawn (doesn't always interfere with historic import)
- Not the best possbile air or thermal barrier - e.g., in winter, can still allow for condensation to form on glass

 

Sealed quilt or roman shade

- This refers to a heavier, well insulated interior shade mounted on tracks that forms a reasonably good air seal around the window
- A well known brand is  Window Quilt (claimed R value from 4.6 to 7.1)

- Bulky, and may not appeal to some; may detract from historic import
- Better air/termal barrier than a roller shad, but might be less than adequate if both UV protection and natural ventilation are desired in summer

 

Exterior storm window
- Might help to further mitigate any air/moisture infiltration issues
- Newer ones are designed to be nearly invisible - don't detract from historic import
- Can be onerous to remove every spring and replace every fall

 

Use of exterior awnings, overhangs, or plantings (transpiration, shade)
- Natural, passive
- Can help extend the effects of existing heating/cooling mechanisms

 

In general, what approaches have any of you attempted, and what sort of results have you achieved? What seems to be a preferred strategy (or combination of strategies), or potential best practice solution to this problem?

Tags: Barrier, Preservation, Thermal, Transfer, UV, Windows

Views: 1562

Replies to This Discussion

I did an audit recently for a lady that does custom window treatments.  Curtains, blinds, drapes.  She discussed the Hunter Douglas line of blinds that she handles.  Interesting stuff.  Some have an Energy Star Label, and make claims of an R-Value.

My personal preference is for Solar control outside the envelope.  My professional guidance is that people have to do something and an effective interior solar control they will have installed and use is better than an approach that is not used or even installed.

Thanks very much Bill, for describing your exterior storm solution (sorry I'd neglected to reply when you first posted this a year ago). Question I have is: Do you drill weep holes in the bottom furring strip supporting the exterior storm? And if so, do you just leave them open or install small plugs and open or close when necessary? Thanks Bill!

Hi John,

I don't internet much either.

I install the bottom furring strip in pieces and usually have enough left over from the other 3 sides to piece together the bottom. This is the only time I use that funky PVC wood. I keep the holes small, so I feel like it is OK to leave them open all the time. I haven't had any call backs yet, though sometimes I wonder if it is wise to claim that exterior storms will eliminate interior condensation problems.

Thank you so much for starting this group, my overarching passion is to merge the craftsmanship still intact in many older buildings with technology and building science.

John,

I'd also like to add to your "laundry list" a product that I have had some experience/frustration with, but ultimately hope for. http://www.solarizewindowinsulators.com/ It's dang intriguing if nothing else. I'd love to hear of other folks' experiences with the Inflector product.

It's basically a reversable interior storm window-- radiant barrier on one side, solar absorber on the other. It's brilliant in concept but I can't help thinking it looks like an overpriced NASA-designed trash bag.

My mother in law had three skylights facing south in her 1890's home-office. She loved the light, hated the heat, and wanted to save energy in the winter too. (Wow, that's a lot to ask of a hole in your ceiling). So I installed three Inflector panels. She hated the way they looked and took them out before I ever got any good data on their performance. I'm a little suspicious of their own data claims, as the product is outside the realm of a SHGC-defined window/ storm tests.

Hi Chris. Thanks very much for added this to the forum. The information and test data they provide seems rather substantial. But I agree with you -- it'd be great to hear from any one else who's installed these or a similar reflective barrier, and had had a chance to observe the results. Agree that it at least sounds good.

Here is my list of other professionally made interior air panels and interior "storms":

Downeast Interior Storms
Rendon Sabina
47 Chase Farm Rd.
Newcastle, Maine 04553
207.380.7680
rendon at downeastinteriorstorms dot com
http://www.downeastinteriorstorms.com/

Eugene Mueller
Energy Wise Mfg
563.542.2134
http://www.energywisemfg.com/insiders.html

Advance Energy Panels (AEP)
James Levine
(800) 819-9463
http://www.windotherm.com/index.htm
AEP now has kits to make panels:
http://www.advancedenergypanels.com/department/kits-3.cfm?killnav=1

R-Plus Window Insulators
http://www.proactiveenergyconcepts.com/proof.html

Indows
http://www.indowwindows.com/

Hi John,

Thanks very much for contributing all this information. It looks like a few of the links were broken when I tried them. In particular, the "Buy AEP -Kit" button is broken on both the Windo-Therm and AEP home pages and I couldn't find any other obvious links that worked. On the other hand, if you Google "Advanced Energy Panels Kit", quite a number of third parties who resell them are listed. Also, the Window-Therm and AEP home pages (one in the same) are either http://www.windotherm.com/ or http://www.advancedenergypanels.com/, respectively, while the R-Plus Window Insulators home page now seems to be http://rpluswindows.com/

There's a company right in Boston that makes a very nice aluminum/low-e glass spring tension interior storm that I've seen a few times, who's name just keeps on eluding me. I need to sift though some paper files to find it (never an exciting prospect), but when I do, I'll post here as well.

Thanks again, John, and hope all is going well by you!

~John

Both interior air panels and exterior storms are now included in the National Window Preservation Standards:

Air panels:

http://ptnresource.org/WPSC_forum/viewtopic.php?f=19&t=76

Storms:

http://ptnresource.org/WPSC_forum/viewtopic.php?f=19&t=184

John

www.HistoricHomeWorks.com

This is great, John. Thanks very much for posting these links here...

~John

Larson is a manufacturer with national distribution of interior and exterior storm windows. See:  http://www.larsondoors.com/storm_windows/ for more information.

It is indeed a challenge to retain those historic windows, etc. but I think any contractor can remodel it maybe by adding blinds, etc. nothing is impossible now.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Don Fitchett commented on Diane Chojnowski's group Facebook Pages
"I just went through the 1st 2 pages of member's facebook pages liking them. While our training…"
6 minutes ago
Don Fitchett joined Diane Chojnowski's group
Thumbnail

Facebook Pages

Does your company or organization have a Facebook Page?This group is for pros who have facebook…See More
42 minutes ago
Mike Kandel added 3 discussions to the group Building Performance Institute (BPI)
1 hour ago
Mike Kandel posted discussions
1 hour ago
EnergyLogic Academy updated an event

RESNET Phase 2 Rater Training - Field Training at EnergyLogic Academy - Berthoud CO

September 22, 2014 to September 24, 2014
The EnergyLogic Academy will be hosting the second phase of HERS Rater Training August 4th - 7th,…See More
1 hour ago
Mike Kandel commented on David Byrnes's blog post Strategies To Keep Millennials At Their Peak Performance In A Home Performance Company
"David - I'd like to speak with you about this article. Please email me at mkandel@bpi.org."
1 hour ago
Hal Skinner replied to Richard Beyer's discussion Spontaneous Combustion and Flash Fire regarding Spray Foam Insulation
"This thread has certainly turned into what sounds like  a thread from a fire safety website…"
4 hours ago
Barbara Smith replied to Mike Kandel's discussion Our Homes Suck – And That's Why Our Kids Have Sinus Problems
"RIVEC is a project of the Lawrence Berkeley Lab.  It's a residential ventilation fan…"
4 hours ago
tedkidd replied to Mike Kandel's discussion Our Homes Suck – And That's Why Our Kids Have Sinus Problems
"Richard, I don't "Know" that the earth is not flat, but I'm pretty confident it…"
5 hours ago
Shawn O'Neill replied to Mike Kandel's discussion Our Homes Suck – And That's Why Our Kids Have Sinus Problems
"    Great discussion and points brought up via this "fuse" lit.  More…"
6 hours ago
John Proctor commented on Christopher Morin's blog post How do You Test a TXV?
"Oh yes one more item. There has to be a combination of water and ice to achieve 32 degrees F. That…"
6 hours ago
John Proctor commented on Christopher Morin's blog post How do You Test a TXV?
"Thank you for the nice post. Remember that the important thing is the actual superheat that…"
6 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service