They didn't like my comments FIRED 5 minutes ago. Do whats right or get last check for speaking out on poor installation, OUCH

Views: 248

Reply to This

Replies to This Discussion

We're all in suspense.  What defects did you point out?

Unprimed pine 1x6 in contact with concrete foundation..contaminating entire house with lead dust from window removal. Not following Lead safe NO Hepa vac, no respirators no shame

Maybe the EPA would be interested in the lead issue.

I guess it goes without saying, but you'll be happier and doing more good in a place where the standards are higher.

I did send to EPA on sat morn

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Mark posted an event

BPI Building Analyst Refresher at The School for Energy Efficiency

July 14, 2015 to July 15, 2015
Length: 2 days Description: For those already BPI certified and need to take re-certification tests…See More
11 minutes ago
Colin Genge posted an event

Air Leakage Testing for Home Inspectors at Online

July 7, 2015 from 1pm to 2pm
• What sort of effect will IECC adoption have on the building industry? Home owners? Inspectors? •…See More
47 minutes ago
jerrycarter is now a member of Home Energy Pros
2 hours ago
Bijou Lulla posted a blog post

ENERGY EFFICIENCY RETROFITS.....IN NUMBERS WE TRUST

There has been much ado about the recent paper published by E2e; Do Energy Efficiency Investments…See More
15 hours ago
Mariusz Chorazy posted a blog post

Here are a few tips to keep your air conditioning bill low

TAKE GOOD CARE OF YOUR AIR CONDITIONER – Like any major appliance, your AC requires regular…See More
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Morgan, I got this below from the Knight installation manual. I note a few things, -These…"
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
Saturday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
Saturday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service