# Fun with Neutral Pressure Planes (NPP)

Greetings

First of all......

* As we upgrade and build new....

I think it is time to eliminate atmospherically vented appliances from the breathing zones of our homes

* I realize that the effects of wind and mechanical equipment can and often do overwhelm Stack Effect.

My current favorite online resources for visualizing "Stack Effect" are.....

*John Straube's Article

http://www.buildingscience.com/documents/digests/bsd-014-air-flow-c...

*John Klote's Article

http://fire.nist.gov/bfrlpubs/fire91/PDF/f91013.pdf

*Bud Poll's Worksheet

I plan to post some Illustrations and see if you folks agree with my current thinking about the location of Neutral Pressure Planes

Meanwhile...

Does anyone else have suggestions for online links concerning  "Stack Effect"?

Views: 5454

### Replies to This Discussion

To the last question, as I think you've illustrated, npp is relative to where leaks exist more than the shape of the total structure.  Assuming the house is airtight I'd guess the flue, being the only leak, is the equalizer.  Where ever it ends, the pressure between inside and outside will equalize - so that's the neutral wrt outside.  (Put this house completely under water and it fills to the pipe.)

If there were just leakage to outside to the height of the pipe, then neutral is probably at 3ft.

Now in a regular house with some leakage throughout, that pipe becomes a leakage supply that low in the stack.  This makes me think dominant leakage drives npp.  (Open a low window and NPP goes up.  Open a high window and it goes down)

Ted,

thanks for commenting

I confess that I do not know the answer.

I have a "guess"  that is very different from yours

This particular example is more complex than I first imagined

I also tried to imagine this as a "house" and "snorkel" under water just as a thought experiment

I am not so sure that the "underwater" analogy works.....

The "underwater analogy" would not predict the location of NPP in the other example Illustrations that I posted(the one window & two window examples)

Hi John, Ted,

A perfectly sealed house seems to leave us in limbo as there would be zero air flow.  If some exchange managed to occur via the flue, then the NPP would have to be located near the middle of the flue pipe to provide the same ▲ pressure on each end.  But I'm guessing as well.

The better question would be to consider some uniform leakage and define the location of the NPP in that regards.

Ted, you said "(Open a low window and NPP goes up.  Open a high window and it goes down)"  That should be the other way around?

Bud

Ted,

Your comment about dominant leakage driving the location of the NPP is consistent with the John Straube and John Klote Articles.

I agree with Bud that the NPP will move closer to the larger opening

Bud,

I think some of the examples in the Klote paper come close to what you are suggesting....

They show a narrow slot that is the full height of the enclosure in addition to the other openings that are being considered

To me the narrow slot is analagous to "uniform leakage"

Here is my illustration of Example 3 from the John Klote Paper "...Analysis of Stack Effect"

I think the intention of the 1/4" x 100 ft tall opening is to simulate "uniform leakage"..

My take from this example:

The relatively Larger Openings (10 square feet each) have more influence on the location of the NPP than the Not-As-Big (2 square feet) "uniform leakage" opening

here is the link to the John Klote Paper

http://fire.nist.gov/bfrlpubs/fire91/PDF/f91013.pdf

You've got it John.  Now, if another window were opened, we know the NPP would move, but how does it move?  We can predict where it will move to, but all of the pressures will have changed.  What causes the change in the pressures?

Bud

Hey, you guys bail on me? I don't see npp moving the way you do yet and need more explanation.

My take is a bigger opening reduces/releases pressure, therefore moving the npp away from it, can someone help me see why this is the opposite of what others see?

Also, wouldn't opening an upstairs window make the basement go more negative?

Ted, you've got it:

"a bigger opening reduces/releases pressure" correct, if that opening is above the NPP.

"Also, wouldn't opening an upstairs window make the basement go more negative?" Also correct, in fact it makes the whole house go a bit more negative.

Example, a balanced house with the NPP right in the middle.  Let's assume a cold day with +4pa at the top and -4pa at the bottom.  That's a total of 8pa of stack pressure from the earlier equations.  If we open an upstairs window as you state, air will escape and the pressure inside the whole house will go down, let's say 2pa.  That would give us a +2pa at the top and -6pa at the bottom, so we will have retained our total 8pa of stack pressure, but the NPP will have moved closer to the top, where we opened that window.

Bud

Ted,  thanks for the dialogue

I think that opening a window upstairs may or may not cause the basement to go more negative.

It depends on the season and where the NPP was before the window was opened.

In some homes the NPP can be above the 2nd floor ceiling during the heating season.

I don't have a quick explanation for your other question....

I will work on something...meanwhile

Have you had a look at John Straube's BSD-104?

http://www.buildingscience.com/documents/digests/bsd-014-air-flow-c...

maybe his illustrations will help

Comparing the standard flow diagrams for a home to one of using a windproof layer of insulation board on the outside and having the space between studs & joists part of the airflow path.

A use for the idea was with a solar gain wall, but you can heat/cool the air other ways. Then, adding thermal-mass using pvc pipes in the open space now without insulation in the flow path to have the heat-cool last over a day-night, this reduces energy to maintain comfort zone for any system.

If you review the standard flow with this in mind, infiltration to open windows & doors & all, the floors are connected to ceiling vents, that is either down the wall or up into the roof close below the weather-proof top with a return to the wall and floor loop.

This really changes the overall flow path and thermal opportunities so adding the thought to this example, which is a huge volume so interested in that effect and what flow would be.

John, since we are having fun with Neutral Pressure Planes I'll ask this question here.

I was following a link on Allison Bailes' blog: http://homeenergypros.lbl.gov/profiles/blogs/a-home-energy-rater-or...   lots of great links there.  But I went to this one: http://www.energyvanguard.com/blog-building-science-HERS-BPI/bid/42...

This is a guest post by Paul Raymer.  There is a ventilation chart and a quick example below it that states a 60cfm fan would be appropriate for their sample home, either intake, exhaust, or a balanced solution like a HRV.  My question is, if 60cfm is correct for an intake or exhaust remedy, would the balanced solution need to be 60cfm or only 30cfm?

The nature of the NPP is that it will adjust and reduce a 60cfm exhaust to only 30cfm.  Or it will do the same to a 60cfm intake.  But a balanced solution doesn't shift the NPP, so a 60cfm HRV would result is an actual 60cfm flow rate.

Bud

## Featured Forum Discussions

### Strange IR Image

Started by Larry Nissman in General Forum. Last reply by Bryan Gabriel yesterday.

### 7,200 Normal Homeowner Minds Blown by Proof Is Possible Tour, Private Market Demanding Proven Home Performance

Started by Corbett Lunsford in Marketing. Last reply by Robert DV Feb 16.

### BPI Supports Strong Consumer Protection in Residential PACE Financing Programs

Started by Quinn Korzeniecki in General Forum Feb 10.

### Hero Pace Program?

Started by Horace Douglas Hunt, Jr. in General Forum. Last reply by Ryan Miller Feb 9.

### BPI February Newsletter & New Logos

Started by Quinn Korzeniecki in General Forum Feb 9.

• View All

## Latest Activity

terry nordbye added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase

### Combustion anaylizer Testo 310

This little beauty only has a few hours on it. Almost brand new in box.Sell: \$350.Terry 415 669…See More
2 hours ago
Barbara Smith's video was featured

### Indiana HCA...On Location - Celebrating 40 Years of the Weatherization Assistance Program (WAP)

The Indiana Housing and Community Development Authority (IHCDA) interviewed two clients of Weatherization Assistance Program (WAP). Both homes were weatheriz...
3 hours ago
Home Energy Magazine's blog post was featured

### Art Rosenfeld's Legacy

Art…See More
yesterday
Efficiency First California and Kevin Daly joined Home Energy Pros
yesterday
Kevin Daly joined allen p tanner's group

### Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
yesterday
"Is this a close up or broad view?"
yesterday
Home Energy Magazine posted a blog post

### Art Rosenfeld's Legacy

Art…See More
Tuesday
Ashique Ibrahim posted a status
"Hello everyone.Please suggest a software to carry out analysis of energy auditing."
Tuesday

## Events

• ### Better Buildings Peer Exchange Call: Making an Impact: Low-Income Energy Efficiency Programs

February 23, 2017 from 1pm to 2:30pm – Eastern Time

## Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines