Fix this leakage?
What sort of leakage reduction could I expect if I try to plug all these tiny gaps?
This is a typical cathedral ceiling around these parts, 2x6 tongue and groove over 4x beams. In this image we're looking at a big valley rafter running diagonally in front, with a beam in the background at right. There are a couple of can lights and a couple of skylights in there too. This is after about 30 minutes with the door running and a 20 degree delta T. All of the beams have strips of trim, about 3/8" x 1", nailed on with brads. Lots of air comes out from behind that trim, where boards end. Relatively little comes out in the field, apparently because there's poly sheeting behind the 2x6.
It would be possible to pull each piece of trim with a flat bar, pull the nails, caulk behind it, drill a hole into each joint, inject more caulk in hopes of sealing the tongue/groove, and renail the trim. Some of this stuff is 16 feet in the air above the grand piano, really hard to get at.
Ever done a test-in, test-out on leakage like this? Did you get big results? This house is well around 2 CFM50 per square foot, so it needs a major reduction.
Views: 155
- Attachments:
-
-
car decking.jpg, 44 KB
-
Replies to This Discussion
-
Permalink Reply by Craig Bird on -
I have sealed this before. IMO, it would be easier to run two beads of caulk on each side of trim rather than removing the trim piece. Unfortunately I didn't individually test the measure when I did the job, so I am not sure how much that contributed.
-
Permalink Reply by Bud Poll on -
Hi David,
I've worked above expensive furnishings and either everything has to be moved or protected. Drop that flat bar and no one is going to be happy. Thus, I might consider the back door approach. Do everything else and what is left is some base amount plus that ceiling. If you can isolate that room in any way, some zone pressure readings might help identify how much is coming from where. Again, even if you can't read that space, maybe you can read others. Divide and conquer.
Bud
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
tedkidd replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"Pat, I think you and I agree on a LOT of things.
One thing I don't want to see is more…"
tedkidd commented on Tom Delconte's blog post Robert Shiller Says Retrofits Are Never Worth It!"Bob B.
Buying a home is a good investment because it is forced savings more than a good…"
Joe Huang posted a discussionWhite Box Technologies launches Web-based weather data for building energy simulations
White Box Technologies is pleased to announce under agreement with ASHRAE the launch of WBT Weather…See More
Tom Delconte commented on Tom Delconte's blog post Lykans $29, Vampires $0 !"Bill: these are available for free at www.freeenergy.com . Just ask for Jen Guarater! I…"
Joseph Lamy commented on Jim Gunshinan's blog post The Universe Is Made of Stories"My life changed when I got 'ductalatored' - became familiar with proper sizing guides for…"
Judi Lyall joined allen p tanner's group
Energy Auditing Equipment for Sale, Trade or to Purchase
Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
Judi Lyall replied to David Starrett's discussion I am looking for a good IR camera in the group Energy Auditing Equipment for Sale, Trade or to Purchase"Hi there
I am selling my equipment and have a great Fluke TIR for sale for 3600.00
If…"
William H Nickerson commented on Tom Delconte's blog post Lykans $29, Vampires $0 !"66 watts a/sec -3960 w/min 237600 w/hr 5702400 w/day …"
tedkidd commented on Jim Gunshinan's blog post The Universe Is Made of Stories"I think Tom is busting your chops Jim. The "drivel" part may not have been well…"
Tom Maides commented on Jim Gunshinan's blog post The Universe Is Made of Stories"Some of the best scientists of the previous 1000 years were also leaders in the Church. Aside…"
© 2013 Created by Lawrence Berkeley National Laboratory.
