Expressed concerns over the scope of work that the vendors are performing with employees in the HES program, work relating to the combustion testing of fossil fuel heating appliances.

The Heating, Piping and Cooling Work Examining Board has ruled that that CAZ combustion testing is licensable work and cannot be performed by any individual(s) without proper licensure pursuant to Chapter 393 of the Connecticut General Statutes and Regulations.

The Heating, Piping and Cooling Work Examining Board has a meeting scheduled for Monday, May 23 , 2011 at 9:30 a.m. in Room-126 at the Department of Consumer Protection, 165 Capitol Avenue, Hartford, CT. The purpose of this meeting is to provide them with an overview of the HES program for review and clarity as to the licensure requirements for work that may pertain to licensure work under Chapter 393 of the Connecticut General Statutes.

Views: 206

Reply to This

Replies to This Discussion

John,

I dont know where you got that from but, you better check your  BPI policy and procedures manual. you are now BPI trainined to know better. Just because your working in a differant program or under a different desigation (HERS,WAP etc) doesnt mean you can now look the other way.


BPI Certifications also ensure that the candidate understands the interaction of specific building systems with other building systems so that it does not create conditions that are harmful to life,

limb or property.

 

Building Analyst Professional Certification Examination Specification


This certification is intended for those individuals who conduct building performance audits, including measurement and verification services with related building analysis.

(this statment should cover every one on your doesnt apply list)

If something ever went wrong on your job site a lawyer would have a field day.

 


BPI Certification

individuals by BPI or its affiliates, to prove knowledge, skills and professional competency in the building performance industry designations. ( any designation)

 


BPI Accredited Organization

– An entity that complies with certain requirements set by BPI that is intended to enhance the delivery of consistent, quality focused building performance services.

Here in Maine we are required by the State to hold Licensure in both Oil and Gas in order to perform Caz testing.  These limited technician licenses allow for testing procedures only and adhere to strict protocol.

Fortunately for us, many BPI Analysts had the benefit of being taught by the estimable Senor Karg.  Safety of all concerned was the over riding factor.

We at Maintenance Men have chosen to turn down several Retrofit opportunities due to safety issues investment property owners refused to correct. 

We hold several BPI and other Certifications. The ethics and knowledge of the inspector is far more important to training than certificate.  It is one thing to pass an exam, it is another to be able to conceptualize, retain and actualize the information infield conditions.  CAZ testing is critical but, with all things, it takes practice.  It needs to be done in a variety of circumstance but in a consistent manner.  Adhering to a strict set of protocols is essential.  An hour of training in no way prepares someone for what they encounter in the field.

John M, I hate to say it but that is not accurate. If you are an Accredited Contractor, no matter what "programs" you are running, you are bound to a contract that you signed with BPI. This is an accurate depiction of the bigger problem.

 

John, I just checked on BPI's website, and your company is an Accredited Contractor. You may want to go to BPI's website and download the polocies and procedures that Green Star should be following as an Accreditied Contractor. If I can help you with any information, just let me know. We need to be the elite in this or any other state as BPI Accredited Contractors and miss information is what will get those in trouble if not paying attention and will also give a bad reputation to the name of BPI and the status of "Accredited Contractor". If you go to BPI's home page and click on "Documents" on the upper bar, then click on "policies and procedures". From there click on "BPI Accreditation Policies and Procedures" which will bring you to a 17 page document that someone in your company must have read and signed. Please make yourself aware of your obligations as an Accreditied Contractor so that we keep this status in good standing with both consumers and program implimenters within the state.
The fox has been minding the hen house.Thats why we got into thing in the first place.

Mr. Dunseith,

At the meeting today in Hartford, things were a little confusing. UI and CL&P tried selling the board on letting HES vendors drill and test for "CO" levels, not stating that we test for draft and efficiency. When asked the question, they said "no, were not testing that". I couldn't believe it. They then asked if the technicians did a "smoke" test on oil units, and the guy from UI said "yeah, we test spillage"...not knowing what a smoke test was. The board decided to not rule on this yet and have the states lawyers look over the wording of the CT General Status which the board believes to mean that only licensed HVAC or oil burner technicians can actually do the "combustion testing". The next meeting is in July and I will do my homeowrk before then and pass along information. Certain states are ammending procedures so this testing can be done by others, so I'll try to pass along that information. I'll keep you updated.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Malcolm McKelvie replied to Alan Gindt's discussion Minneapolis Blower Door System for sale in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"yes I would pay the delivery fee!"
21 hours ago
Alan Gindt replied to Alan Gindt's discussion Minneapolis Blower Door System for sale in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"Malcolm, If you want to pay delivery from USA we can talk. Otherwise no thanks."
21 hours ago
Malcolm McKelvie replied to Alan Gindt's discussion Minneapolis Blower Door System for sale in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"How old is it? I assume it is in good working order? I'm interested in it but the price needs…"
23 hours ago
William H Nickerson replied to Kim Tanner's discussion Fantastic innovation
"So that's where you use those True Flow plates....."
yesterday
Colin Genge updated an event
Thumbnail

Passive House Testing Webinar with Kevin Brennan of the Passive House Academy at Online

September 29, 2015 from 1pm to 2pm
Tests needed to qualify as a passive houseWhy we’re seeing an increase in PH buildingsBest…See More
yesterday
Colin Genge updated an event
Thumbnail

DM32 Smart Gauge 101 Webinar at Online

September 22, 2015 from 1pm to 2pm
Webinar Learning Objectives:Gauge settings and operationCalculate results in the gaugeUpdate the…See More
yesterday
Colin Genge updated an event
Thumbnail

Blower Door 101 Webinar at Online

September 15, 2015 from 1pm to 2pm
See how easy it is to do your first test. Learn tips to perform your first duct test in only twenty…See More
yesterday
Colin Genge updated an event
Thumbnail

Zone Pressure Diagnostics (ZPD) with Bill Eckman of NME$A Webinar at Online

September 10, 2015 from 1pm to 2pm
Benefits and limitations of Zonal Pressure Diagnostics (ZPD).Best practices for accurate…See More
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service