Empirical evidence that missing refrigerant suction line insulation decreases efficiency therefore increasing energy costs.

  Does anyone have any access to actual dollar figures for the cost of missing/ torn/ broken refrigerant suction line insulation? 

 For the program I am involved with we are trying to provide evidence that there is a significant cost increase that related to diminished/ broken/ missing suction line insulation that will make the repair show up as a cost effective repair or replacement.

Anything general or specific that could aid us in this research would be greatly appreciated.

Tags: Cost, Suction, effective, flash, gas, insulation, line, point, refrigerant, repairs

Views: 330

Reply to This

Replies to This Discussion

Some have claimed insulating the high and low side lines together has helped reduce high side pressure, but the jury is still out on how much energy it saves.

Very good question.Last week I attended a seminar on the Internation energy conservation codes.One of the changes was increasing insulation by one inch on the high side.There may be some more info on it if you search IECC building codes?Section 403 and IRC sectionM1401.3,good luck.Keep us posted

The first part is simple - not that are legitimate as it does depend on the unit, where it is located,conditions & how much the unit it is used - though you might be able to find a % figure that might work for you. As for having a cost reason to fix something damaged, worn out, etc... that is a big issue IMHO - some items (and I am not saying that this is one) should just be listed as mandatory like air sealing before you add more insulation into an attic, etc...

The consensus is that we should insulate it for numerous reasons, however, without the actual dollar figure metric to install in the NEAT library, it only cuts down on the allowable expense that goes toward some other measures.

Thanks everyone for the info, keep it coming! 

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.

Latest Activity

John Rising replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
"Hi Bachi, We have done many projects where we have installed boxes around recessed lights to…"
24 minutes ago
Isaac Savage's event was featured
1 hour ago
Craig Savage's video was featured

What is a Heat Pump Water Heater

A simple animation describing how a heat pump water heater works
1 hour ago
Profile IconJeff Pello, Maxmam, Barbara Hall and 1 more joined Home Energy Pros
2 hours ago

John Abdo just added their location.
(via Member Map)

12 hours ago
Nick Helmholdt replied to Joshua Knittel's discussion Google Thermal View? in the group INFRARED THERMOGRAPHY USERS
"Any bets on how long it will take this company to land in court? A local energy efficiency group in…"
18 hours ago
Matthew Redmond posted a photo
19 hours ago
Matthew Redmond posted a status
"Full house for NYSWDA's ASHRAE 62.2 course today. A lot of discussion on implementing this standard on NY State's diverse housing stock."
19 hours ago
Paul Scheckel posted a blog post

Less oil, more courage: Energy and Art

Hard to admit, but I'm not all fun-facts all the time. Sometimes I even pay attention to things…See More
20 hours ago
Tom Delconte posted a blog post
22 hours ago
tedkidd replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"Pat, I think you and I agree on a LOT of things.   One thing I don't want to see is more…"
yesterday
tedkidd commented on Tom Delconte's blog post Robert Shiller Says Retrofits Are Never Worth It!
"Bob B.   Buying a home is a good investment because it is forced savings more than a good…"
yesterday

© 2013   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service