I've noticed my new furnace uses about the same electrical power to operate as my old furnace, even though the new furnace (44k) is 1/2 the BTU of he old one (88k). Both furnaces use 1/3HP 5amp blower motors, old furnace was on high speed, new furnace was on low. New furnace uses a 1.8amp shaded pole inducer motor and is considerably larger than my previous furnace inducer. I didn't get the amp rating on the old furnace inducer, but it was a standard 'c frame' motor, most are about 1amp. Condensing furnaces do tend to use much larger inducer motors overall.

I write this post because I've noticed the increased electrical consumption with lower temperatures. Electrical efficiency isn't mentioned in furnace specs, but it appears to contribute considerably to operation costs.

Views: 78

Attachments:

Reply to This

Replies to This Discussion

Have you looked into any of the ECM motors? I hear they consume less electricity. It would probably take a couple years to pay for itself in savings, but with a new furnace, it may be worth looking into.

http://www.youtube.com/watch?v=YjoY6hRSudk

This motor looks like a good bet.

ECM could be the way to go. At $250 it does have a long payback though. The use of a 1.8A Shaded Pole inducer motor seems wasteful, a PSC would use 1/2 the power to do the same job.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Griffin Hagle replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
11 minutes ago
Griffin Hagle replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Kurt, Whoops, looks like I got my links mixed up. Thanks for pointing that out. Here's the…"
29 minutes ago
Kurt Shafer replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Glen,  I went to Homepower.com and did a search for whole house fan. Could not find that…"
41 minutes ago
Glen Gallo replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"I no longer have my subscription to the Home Power Magazine but these figures were pulled from the…"
55 minutes ago
Kurt Shafer replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Glen,  I read your blog with some interest.  You say  " Per the Home…"
1 hour ago
tedkidd commented on Scott Mellberg's blog post Lessons from Energy Efficiency Advisors: Getting Homeowners Onboard with Home Performance
"OMG, you are one of those myopic thinkers are you? Others do it better therefore drastic action is…"
1 hour ago
Glen Gallo replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"I do not like them and I am in Southern California. I think the whole house fan in prescriptive…"
1 hour ago
Kurt Shafer replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Griffin,  Is this really the link you…"
2 hours ago
Kurt Shafer replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Tom, great new post! Thank you for the focus. As you know, the term "whole house fan" is…"
2 hours ago
Don Fitchett replied to Brandon Walton's discussion 12 Things Every Home Performance Contractor Should Have on Their Work Truck
"Thank you Brandon, for sharing."
2 hours ago
David Eakin commented on Scott Mellberg's blog post Lessons from Energy Efficiency Advisors: Getting Homeowners Onboard with Home Performance
"Ted, I'm coming at this issue from a national perspective. If the USA were leading the world…"
2 hours ago
Kurt Shafer commented on Kurt Shafer's blog post What is your opinion about members promoting products here?
"Comment by John Proctor 9 hours agoDelete Comment Kurt: So my question is how…"
3 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service