I was looking to beef up my offerings for standard energy audit and feel like some quick screening tests for HVAC would be great. The only test I currently do is a dominate duct test. 

Since I am lacking on the HVAC knowledge side, I would also like to know how to interpret those tests - I am sure someone will suggest a static pressure test - so, how do you perform and what is normal and what actions do you recommend for results outside of normal.

Views: 1504

Reply to This

Replies to This Discussion

Ted

I can do a blower door test, and IR scan and a flow hood round in 45-60 minutes.  A quick look at the bill and out of the house in 1-1/2 hours.  This is just a comfort diagnostic and not a BPI audit.  I don't want to do static pressure (my staff is told not to do them even though they have and understand them) because, as stated earlier, I don't want to drill a coil.

Ed, I think some furnaces simply (and literally) scream for ESP.  It takes 3 minutes, and can really help design.  I hate being at design stage and having questions about simple things. One less thing to guess about.  I bought a Testo manometer for the purpose, and for room to room when the interview uncovers problems in very specific locations I'm trying to get my head around. I'm not a DG700 whiz (unlike http://bit.ly/rickchitwood), and prefer to leave that to manage cruise control. 

I'm not typically done with my interview until the 90 minute mark.  When I was just "selling" audits and not performing them, I was usually in the house 2.5-3 hours.  

If I'm gonna spend a bunch of time scheduling, then going to someone's house, I want to get as much out of the visit as I can.  And I don't want to miss something critical that might mean the difference between winning and losing.  

It takes most people hearing something 7 times before it sinks in.  So if I say something 4 times on the first visit, we are half way there. 

My auditor and I had a GREAT relationship, we significantly overlapped which meant really collaborative design process, and big jobs (12-60k with 20-30 being the most common range).  The information I gathered often meant he didn't have to go back because he missed something, and vice versa. 

And I think by having people feel they really understand the logic behind design, and feel it was really tailored to meet their needs, makes them much more comfortable signing big contracts. 

on the side of the furnace is listed the temp rise, Most/all furnace that have high static pressure will also have high temp and will go on off the high temp switch.  This switch is on all 80% and 90% gas and LP gas is listed the what the top temp is.  I take out the high temp switch and do a static pressure test BUT I do this all the time for 30 yr.  If you do it hot you can and will short the low volt fuse so know your stuff before working on furnaces.  If I do a quick temp test I take out a screw and put in a "K" wire then read off my test meter.  I bench mark the furnace with 4 temps  and CO 

There are a bunch of things you can do to evaluate an HVAC system.  A static pressure test is a good one for getting a grip on air flow BUT the industry is now saying (and correctly so) that the air handler and any associated coils need to be as clean as "new".  This is a good call because the blower CFM data is set by testing "new" units.  The most you could get from a static pressure test without cleaning everything (blower & coil) is whether or not it is performing to specs.  If not then it's time for the deeper look or a call to your local HVAC shop.   

Checking performance of a HVAC system includes a lot of options depending on many variables.  The best approach is to work through the entire system...looking at everything.  We don't see too many Home Performance folks coming in to learn HVAC but we do see a lot of HVAC folks coming in to learn Home Performance.  If you are interested in getting deeper into HVAC we have many courses and programs that take you there @ www.hvacredu.net

All are BPI recognized. 

 

 

Craig

Thanks for asking.

Some great info here I can easily use.

RSS

Videos

  • Add Videos
  • View All

Twitter

Latest Activity

Rob Madden, Solar Home Broker replied to Rob Madden, Solar Home Broker's discussion Indoor Air Quality Monitors and Meters
"Awesome respnose...thanks for your insight!"
19 hours ago
Zane Goff replied to Rob Madden, Solar Home Broker's discussion Indoor Air Quality Monitors and Meters
"We use the air advice quick test device and I'd recommend it for the depth of home…"
20 hours ago
Amber Vignieri posted a status
"#Solar does WHAT?! #SunShot busts myths aboutt #SolarRealEstate http://energy.gov/eere/articles/5-common-myths-about-residential-solar"
21 hours ago
Profile Iconnaryking, Rob Hoehn, Hannah Wood and 2 more joined Home Energy Pros
23 hours ago
Chris Laumer-Giddens posted a blog post

Building with Rocks, Rocks. Check out the Drying Potential

Building with Rocks, Rocks! Check out the Drying Potential.Check this out! This 24" x 48" x 2"…See More
yesterday
Evan Mills's blog post was featured

Looking Back and Looking Forward: Home Energy Pros at 5 and 5000

Over the past five years, the Home Energy Pros social network has grown from a twinkle in our eyes…See More
yesterday
Eve Dunham joined Diane Chojnowski's group
Thumbnail

News & Announcements

Share your news and announcements with the community in this group.To post news or an announcement,…See More
yesterday
Eve Dunham joined Tom White's group
Thumbnail

Weatherization

Share your concerns and successes as a weatherization professional, or information for this…See More
yesterday

© 2016   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service