Views: 259

Reply to This

Replies to This Discussion

Hi Jim,

Although my work was much different from traditional energy auditing my checklist was the absolute heart of my efforts.  It seemed like every job I did added several new items to look for, far beyond what is needed for just an energy evaluation.  But, having this information back in the office made a world of difference.  Combine a mature checklist with lots of pictures, both digital and infrared and you will be way ahead with any approach to energy auditing.

Bud

I usually create my own check-list to get an idea of the work important to me and accordingly prioritize the work. Since my business deal with doors and windows, It helps in adding great value to the work as everything gets completed on their time with no extra burden. 

Hi Joe, thanks for responding. Did the checklist evolve over time? Or is it something you picked up and adapted for your business? Can you share any advice with other folks in the home performance industry? 

Hi Jim, as we know nothing remain static in business and need to go along with changes to cope up with the change in business scenario. So, My check list do changes with new demands and requirement. Though certain category remain unchanged too. 

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Colin Genge replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"For those of you who need  a Tectite report, FanTestic's report Generator is powerful…"
16 minutes ago
Colin Genge joined Sean Lintow Sr's group
Thumbnail

Best Practices (Residential)

Best Building, Retrofitting, or even Auditing Practices - what are they, what should change, what…See More
16 minutes ago
Eric Kjelshus replied to Kirsten Richnavsky's discussion Let's Play Stump the Chump! in the group Building Performance Institute (BPI)
"There may not be a solution?"
1 hour ago
Colin Genge posted videos
3 hours ago
Tim Jones replied to Kirsten Richnavsky's discussion Let's Play Stump the Chump! in the group Building Performance Institute (BPI)
"Was there a blech on the stove? Used to cover the flame on a gas stove, sometimes it does not have…"
4 hours ago
Colin Genge replied to Blake Shurtz's discussion Duct blaster with asbestos?
"Two states have concluded that blower door testing does not increase the liability wrt asbestos.…"
4 hours ago
Christopher Morin posted a blog post

HVAC Industry: Who wins with High Warranties?

During the sales process, it is inevitable warranty periods will be raised.  I remember raving…See More
8 hours ago
Colin Genge replied to Kirsten Richnavsky's discussion Let's Play Stump the Chump! in the group Building Performance Institute (BPI)
"Being a novice at CO, I looked up permissible and ambient levels that appear to be 10 PPM and about…"
8 hours ago

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service