Permalink Reply by Dwight Chew on February 2, 2011 at 11:13pm When I do a RCM, I record everything on a graphical data sheet I got from Sierra Building Science. It has all of the pressure and temperature data entries labeled on a system diagram. On the backside of the sheet is the duct test stuff, equipment info, and client info.
The best part is that the forms are laminated and I use a Sharpie marker pen to write down the data. If you ever had to write info down on paper when it suddenly starts to rain, the paper turns into mush very quickly. The plastic laminate form and sharpie allows me to keep on working. When I get home, I xerox the laminated form for a permament copy and reuse the laminated form again. To remove the Sharpie markings, a little alchol and paper towel is needed.
Permalink Reply by Steven Lewis on February 10, 2011 at 2:13pm
Permalink Reply by Dwight Chew on February 11, 2011 at 5:28am
Permalink Reply by Steven Lewis on February 11, 2011 at 6:21am Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Bachi Brunato replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
Bachi Brunato's discussion was featured
Johnny Ritzo's discussion was featured
Tom Delconte's blog post was featured
Christopher Morin's blog post was featured
Mike Rogers's blog post was featured
Mike Rogers posted a blog post
Orvil D Boyer replied to David Starrett's discussion I am looking for a good IR camera in the group Energy Auditing Equipment for Sale, Trade or to Purchase
Orvil D Boyer joined allen p tanner's group© 2013 Created by Lawrence Berkeley National Laboratory.