Does anyone use cooling vests for attic work in the summer?  If so any suggestions?

Views: 419

Reply to This

Replies to This Discussion

Helps some.   Putting Water on roof with drip hose works better but water can get high,  leave off a run or two helps also.

I had never heard of cooling vests until now.  Here is a comparison of some.  http://www.activemsers.org/tipstricks/choosingacoolingvest.html

I have used the Texas Cool Vests which uses phase change materials to keep the trunk of the body cool.  It's good that it's not cold which would be uncomfortable.  But it does extend the amount of time I can spend in a hot attic.  But you have to realize that it is not going to make you feel chilly!  Just a bit more comfortable for a longer time.

Paul I appreciate your reply. That is the kind of info I'm looking for. If I can just make it more tolerable (survivable) come this summer.

Thanks Mike Hartnett

Hi Mike,

Fortunately I no longer have to deal with those extreme temps, hiding in Maine, but I do remember some of that heat from when I worked in NJ and I bet you are dealing with higher temps than we saw.  What I have always wondered is, would it be practical to park a large commercial size air conditioner in the driveway and run a 16" flex duct somehow into those super hot attics?  I haven't played with the cooling numbers, but when it is that hot, anything would help.

I realize this wouldn't be a low cost solution, but sending employees into an oven creates all kinds of safety risks.  Not sure where OSHA stands on the temps people are allowed to work in.

Bud

On a related note, OSHA has this Phone App to help crews anticipate and deal with heat illness:

https://www.osha.gov/SLTC/heatillness/heat_index/heat_app.html

I have not tried the cooling vest. I can extend the working time in an attic by pressurizing the house with the blower door and leaving the attic hatch open. It can still get hot but what a relief when you get next to the hatch and have a nice cooling wind blowing.

These type vests have been used by motorcycle riders for many years. Consensus is that they work well in low humidity conditions; less so in high humidity conditions, but always need airflow to create the evaporative cooling. Not sure how this would be accomplished in an attic unless you had a fan (which would kick up a lot of dust). There is a lot of information available from cycle riders as to what clothing works well to provide comfort in many extremes (with cotton being the worst) so maybe the best attic attire is the extreme heat high-performance gear by Under Armor and others (covered by some version of high-performance/high-wear outerwear like 5.11 pants - not cotton jeans) combined with frequent hydration.

Phase changing cooling vest work great, my weatherization crews wears them all the time. They work like ice packs but at 60degrees. Cool to the body but not ice cold. We keep a cooler of ice water and a 2nd cooling packs in the trucks. They last about 3 to 8 hours between recharging packs in ice water. Recharge time 45 minutes. There’s little to no condensation on the vest and a lot less sweat on the body. We us the RPCM cool vest, here’s a link http://www.coolvest.com

RSS

Featured Forum Discussions

What causes a temperature plane in a home

Started by Energy Wise Solutions in HVAC. Last reply by Peter Krych on Friday. 4 Replies

Velocity Pressure Testing

Started by Horace Douglas Hunt, Jr. in General Forum. Last reply by Horace Douglas Hunt, Jr. Apr 15. 2 Replies

Videos

  • Add Videos
  • View All

Latest Activity

Alana Barnett added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Energy audit equipment -all very new

I have a FLIR infrared camera, E40bx. Only used a few times -box, camera, charger, it is all there,…See More
12 hours ago
Alana Barnett joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
12 hours ago
Crosbey Archery posted a blog post
16 hours ago
Profile IconRon Sarrick and Alana Barnett joined Home Energy Pros
yesterday
Jim Fowler posted a discussion

TREAT modeling of mid-rise apartments low heating load

Does anyone have experience using TREAT to model mid-rise (3-story) apartment buildings with…See More
Friday
Peter Krych replied to Energy Wise Solutions's discussion What causes a temperature plane in a home
"I also should have asked where the furnace was located,basement,1st or 2nd floor. In any case the…"
Friday
Profile IconJim Fowler, Jennifer Flanagan, Debra Smit and 2 more joined Home Energy Pros
Friday
Eric Sperline added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Wanted: Energy Auditing Equipment for sale

I am looking to buy a door frame panel that will accept a duct blaster fan.  I don't need the…See More
Friday

Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service