I'm wondering if any of you Energy Pro's out there have experience with commercial energy auditing software that would include multi-family buildings? Are you using software that you would feel comfortable in recommending?
Tags:
Permalink Reply by Kyle Macht on January 26, 2012 at 11:46am Eric,
I have used TREAT Multifamily and EA-Quip. Overall they were very similar, but I liked TREAT, it was a little easier to use and you pay once for the software. EA-Quip is web based and you pay per building. I have also used eQUEST, which took way too long.
Kyle
Permalink Reply by Barry Kroeker on January 27, 2012 at 11:25am Consider EnergyCAP Energy Management Software.
Two versions are available:
EnergyCAP Enterprise for large organizations
EnergyCAP Express for smaller businesses (free trial available)
Good luck!
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Mark Richardson replied to J.C. Martel's discussion Disasters & sustainable energy
Eric Kjelshus replied to Johnny Ritzo's discussion Selecting a Water Heater
Bachi Brunato replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
Bachi Brunato's discussion was featured
Johnny Ritzo's discussion was featured
Tom Delconte's blog post was featured
Christopher Morin's blog post was featured
Mike Rogers's blog post was featured
Mike Rogers posted a blog post© 2013 Created by Lawrence Berkeley National Laboratory.