Home Energy magazine would like to include a list of great carbon calculators in an article we are working on. Does anyone know of a good carbon calculator that also accounts for renewable energy offsets? A better question may be: do these exist?

 

Thanks for your help!

Views: 110

Reply to This

Replies to This Discussion

This might not be popular with some, but Garbage In = Garbage Out which equates to alot of the calculations & science used

The only carbon calculator that I'm aware of that is approved in Texas for reporting on carbon reductions was developed by Texas A&M's Energy Systems Laboratory.  It's called IC3, which stands for International Code Compliance Calculator.  It's free and you can learn about it at:

 

http://www-esl.tamu.edu/software/ic3

 

and download it or use it online at:

 

http://ic3.tamu.edu/

 

Yours

Doug Garrett

Thank you, Doug!

Not sure what you mean by "renewable energy offsets" but...

http://coolclimate.berkeley.edu/carboncalculator

Thanks, Chris! This is partly what we are looking for because it provides an area to show purchases of electricity from a clean energy program.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.

Latest Activity

Eric Kjelshus replied to Patrick Michaelyan's discussion Hot Upper Stories
"When I am asked to fix this home.   I start with a Heat Loss and gain, blower door IR  sq…"
22 minutes ago

Edward Foskey just added their location.
(via Member Map)

5 hours ago
Profile IconMartin Easley and Richard Vito joined Home Energy Pros
9 hours ago
Bud Poll replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
"This is a topic I have discussed many times, but unfortunately cost is all too often the deciding…"
13 hours ago
Sean Lintow Sr replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
"If you can't talk them into replacing with IC rated... Look into Tenmat - those are designed…"
13 hours ago
Bachi Brunato posted a discussion

Boxing and Insulating Around Non-ICAT Cans

I have a client with 16) 4" halogen recessed light fixtures in the attic.I'd like to cover the cans…See More
19 hours ago
Dennis Heidner replied to Patrick Michaelyan's discussion Hot Upper Stories
"Could you have them make a simple two line graph of the outside temperature, noting sun/clouds,…"
yesterday
Bob Blanchette replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"You make some valid points, especially with the base rate charges. Increasing the base rate instead…"
yesterday
Bob Blanchette replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"Amen, make energy show it's true cost instead of subsidizing it. We have some of the lowest…"
yesterday
Dennis Heidner replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"The press report really doesn't give enough information to clearly answer why  they are…"
yesterday
Edward Foskey commented on Edward Foskey's blog post Preparing to Update the Heat Pump
"Gustavo, Thanks for the input. I agree with you in that I will be waiting till my system's…"
yesterday
Gustavo Melo commented on Edward Foskey's blog post Preparing to Update the Heat Pump
"Any system that is out of warranty is really a coin toss as to whether it is financially better to…"
yesterday

© 2013   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service