Hi everyone, 

   A couple of my colleagues were discussing the benefits of air sealing, when I was asked if I could quantify the actual value of air sealing based on how many BTU's per CFM(50) of air leak.  The software does the energy savings calculations of air sealing for my clients, but I was never asked the actual value per BTU. I guess if I could answer that I would have a better understanding of the math behind the savings. 

Can anyone help me with this? Is there a formula?

Thanks

Luis

Tags: CFM, air, energy, saving, sealing

Views: 1042

Reply to This

Replies to This Discussion

Bud,

"In an article from one of the developers of the "n" number he stated the resulting estimate could be off by minus 50% to plus 100% so calling it a ball park estimate may be generous."

Do you recall the article you found this in?

Thanks,

Graham

I have looked but found no reference to that article.  But my background in research saw those numbers and concluded it wasn't much better than a wild guess, or the old empirical divide by twenty,  But since the results bracket the "20" pretty much, in general they are ok.  Part of what we do is to recognize what fits the many assumptions and what doesn't.  Unfortunately, that might improve our accuracy. but reduce our consistency and it is consistency that our system really demands, even if our numbers are wrong.

Consistently relying on software to generate our answers can be a risky way to do business.

Bud

If you were using TECTITE from The Energy Conservatory, you have this value right away.

Asking for an 'actual value of air sealing' is a research project.

Blower Door guided air-sealing works well for those of us in the real world.

Give the Advanced Infiltration tool a try from Residential Energy Dynamics (RED); I think it will do all you need. It is based on the Alberta Infiltration Model (AIM-2) and it includes TMY3 weather data for North America. It will give you the fuel use (therms, kwh, etc) for infiltration. Start with the pre-weatherization CFM50 and then the post-weatherization CFM50 to determine the savings from air sealing. The tools also does many other useful things.

Here is a link to this free tool: http://www.residentialenergydynamics.com/REDCalcFree/Tools/Advanced....

As a matter of disclosure, I am the author of this procedure, along with my business partner, Charlie Holly.

Bob,

Where does the value 1.08 come from?  I am more familiar with the  "0.018 BTUs per cubic foot to raise its temperature 1° F" that Bud cited.  Using a hypothetical 125 CFM nat. with a delta T of 50 F and your equation I get 6750 BTU/hr.  If I use 0.018 and the same equation I get 113 BTU/hr. Markedly different results.   

There is a factor of 60 difference between the answers that Graham is pointing out.

Reply by Graham Irwin 2 hours ago

Remember to convert CFM (cubic feet per MINUTE) to cubic feet per HOUR (i.e. ft3/hr = CFM/60) if you want an answer in BTU/hr."

Bud

1.08 represents the sensible heat constant. Any time that I've done these calcs it was left out because the complexity was beyond the scope of what I was trying to accomplish, but if someone with the time and expertise wants to expound on this I'd like to know more as well. 

I'll just turn Bob's equation around:

Q (BTU loss/gain) = 1.08 x CFM (natural) x ▲T (F°)

The short explanation is, we need to convert CFM to hours as Graham posted. Multiply by 60 min/hr

Then we have to specify the thermal capacity of air: 0.018 btus/ft³/F°

When that all gets factored in we get (60 x 0.018) which equals the 1.08 and the units of the equation come out in btus/hr.

I scratched that all out, but typing it in is a pain, so you got the short version.

Bud

Bud,

You explained it just fine.  Makes sense. 

Yes, and when I cannot sleep I do my own version counting the length of time my FAN runs to reset my internal temp then take into account the current Delta T of the night and then, finally when does the furnace come back on!

I obviously need help

Don't put any faith in standard formulas that convert cfm50 reductions into air sealing savings.  A house doesn't naturally experience air exchange at a 50 pascal pressure difference.  A blower door will cause air to enter the house from every penetration indiscriminately.  Under natural conditions, air exchange is caused from mechanical ventilation, wind and the stack effect.  An installer who cuts CFM50 in half by sealing windward and ceiling leaks will create MUCH more savings than another installer who just spray foams the sill box.

If anyone is aware of a formula that requires sealing location data to estimate savings, please let me know.  Until then, this is huge opportunity for building scientists to advance our industry.

Dmitri Martin

www.greenstarwi.com
Facebook Twitter Google+ LinkedIn

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Everblue posted events
1 minute ago
eric anderson replied to Kaushal Bharath Raju's discussion Affordability & Deep Energy Upgrade/Passive House Retrofit in Berkeley, California.
"This is my no calculations half assed energy based  renovation suggestions- First off,…"
22 minutes ago
Ed Minch commented on Jim Gunshinan's blog post Energy Out West 2014
"We have been in the instrumented energy auditing and retrofitting business since 1981 and we have…"
58 minutes ago
Allison A. Bailes III commented on Jim Gunshinan's blog post Energy Out West 2014
"Great article, Jim. I run into cynics, too, and not only are they unrealistic, but they're…"
59 minutes ago
Stephanie@SaveOnEnergy posted a video

Powered by SaveOnEnergy.com

Ask Kim - How to Read Your Meter

In this episode, Kim explains how to read your electricity meter either to monitor your own consumption or to double check your bill.
2 hours ago
Tom Mallard replied to Kaushal Bharath Raju's discussion Affordability & Deep Energy Upgrade/Passive House Retrofit in Berkeley, California.
"I've been working on simple thermal upgrades and for collecting heat the roof is a best place…"
2 hours ago
Chris Dorsi posted an event
Thumbnail

2014 Habitat X Summer National Conference at Chico Hot Springs

August 25, 2014 to August 28, 2014
The 2014 Habitat X Summer National Conference will take place at Chico Hot Springs, just down the…See More
2 hours ago
Mst. Fatema Aktar is now a member of Home Energy Pros
12 hours ago
Robert Leone added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Blower Door Package for Sale

Hi,I am selling my blower door with extras as a package or individually. These items are used but…See More
18 hours ago
Profile IconRobert Leone and Richard Vito joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
19 hours ago
Richard Vito joined Sean Lintow Sr's group
Thumbnail

Best Practices (Residential)

Best Building, Retrofitting, or even Auditing Practices - what are they, what should change, what…See More
yesterday
Richard Vito joined James Sayers's group
Thumbnail

Marketing Energy Efficiency

Sharing ideas, tools and examples of promoting energy efficiency to consumersSee More
yesterday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service