Hello,

I have received an email about how BPI is to adopt ASHRAE Standard 62.2-2010, replacing 62-89. Just wondering if anyone can explain what the difference between the two standards is and how it affects energy auditors who are currently using 62-89?

Thanks!

Eric

Views: 1130

Reply to This

Replies to This Discussion

Let us not forget that 62-89 does not exist anymore, and hasn't for over a year.  I'm glad to see BPI finally adopt this current standard, and get the non-existant standard off their books!                   

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Shashank Kirloskar posted a blog post

Important Facts about Solar Energy

“I’d put my money on the sun and solar energy. What a source of power! I hope we don’t have to wait…See More
10 hours ago
reflintorm replied to Dennis McCarthy's discussion Solid state lighting - saves lives- and it improves life .
"In my observation, In most of the lightning appliances led bulbs are used because of their…"
10 hours ago
Chad Mcaulife posted photos
18 hours ago
Bob Blanchette commented on Jeremy Begley's blog post The Home Envelope : Does it Really Matter in a Heat Loss Calculation
"Infiltration makes a HUGE difference. Look at the heat loads on a windy day vs. a calm one. On a…"
18 hours ago
Bob Blanchette commented on Everblue's blog post Poor HVAC Installation Leads to Increased Energy Use
"That explains a LOT of why HVAC system continue to be sized by the same "rule of thumb"…"
19 hours ago
Profile IconChristian Asdal and Shashank Kirloskar joined Home Energy Pros
19 hours ago
Don Fitchett shared their video on Digg
20 hours ago
Don Fitchett shared their video on StumbleUpon
20 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service