BPI's Home Performance-Related Data Standards Published as BPI Standards

The Building Performance Institute, Inc. (BPI) is proud to announce that its BPI-2100-S-2013: Standard for Home Performance-Related Data Transfer and BPI-2200-S-2013: Standard for Home Performance-Related Data Collection have been published as BPI standards. 

"These standards should make the entire home performance industry more effective and profitable by dramatically reducing the costs, time and effort involved in transferring information," said Robin LeBaron, Managing Director of the National Home Performance Council, who coordinated the BPI working group that developed these standards. 

"Affordable financing is key to attracting homeowners to the home performance market," said Larry Zarker, BPI CEO. "In turn, attracting financial investors depends on the accurate transfer of data on each project or pool of projects, so that risk is minimized. This standard will facilitate that seamless transfer of data."

Click here to read more.

Tags: BPI, Data, Released, Standards

Views: 82

Reply to This

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

jerrycarter is now a member of Home Energy Pros
38 minutes ago
Bijou Lulla posted a blog post

ENERGY EFFICIENCY RETROFITS.....IN NUMBERS WE TRUST

There has been much ado about the recent paper published by E2e; Do Energy Efficiency Investments…See More
14 hours ago
Mariusz Chorazy posted a blog post

Here are a few tips to keep your air conditioning bill low

TAKE GOOD CARE OF YOUR AIR CONDITIONER – Like any major appliance, your AC requires regular…See More
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Morgan, I got this below from the Knight installation manual. I note a few things, -These…"
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
Saturday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
Saturday
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
Saturday
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
Saturday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service