BPI Announces Quality Assurance Field Inspection Standard

The Building Performance Institute, Inc. (BPI) is pleased to announce that its new Standard for Residential Building Quality Assurance Related to Post-Installation Field Inspections (BPI-6300-S-201x) is now available for public comment.

BPI-6300-S-201x, also known as the QA Field Inspection Standard, was developed by a working group created by BPI's Standards Technical Committee (STC) and comprised of subject matter experts representing a wide variety of interest categories and geographical locations. The QA Field Inspection Standard provides requirements for quality inspections of residential buildings. This standard includes protocols that provide clear guidance for third-party inspectors to confirm that home performance upgrade measures have been installed in accordance with the workscope and applicable standards. 

Click here to continue reading this article.

Tags: Assurance, BPI, Comment, Field, Inspector, Public, Quality

Views: 177

Reply to This

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Hal Skinner replied to Richard Beyer's discussion Media Reports Spray Polyurethane Foam Insulation spontaneously combusted a $5M Connecticut Home... "The Conclusion"
""fire origin had overheated and ignited during the curing process." No attorney…"
5 hours ago
John Nicholas replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Different houses, different problems, different approaches. A multipoint gives you a slope. The…"
14 hours ago
John Nicholas replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Bud,  I pretty much agree with Sean's points.  Given the time it takes to set up the…"
14 hours ago
Bud Poll replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"A multi-point will take longer, but what will it do for the home owner?  Will it change the…"
16 hours ago
Sean Lintow Sr replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Hmmm good question - personally for air-leakage I would go with multi-point, preferably run from…"
18 hours ago
Richard Beyer posted a discussion

Media Reports Spray Polyurethane Foam Insulation spontaneously combusted a $5M Connecticut Home... "The Conclusion"

OFFICE OF THE FIRE MARSHAL1212 WHITTEMORE RDMIDDLEBURY, CONNECTICUT Fire Investigation Report –…See More
yesterday
Profile IconDavid Hepinstall and Matthew joined Home Energy Pros
yesterday
Steve Leombruno posted a blog post

Static power energy box

Just wondering if You've heard of this Static power energy box that boasts energy consumption…See More
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service