Our Crew Chief asked me this question today:

 

I have an attic with R-25 blown fiberglass insulation.  Is there any reason I should not install blown cellulose on top of it to bring the attic up to R-38?

 

I can't think of any reason.  Does anyone out there know of any reason not to install blown cellulose on top of blown fiberglass?

 

Thanks!

George Kopf

Views: 3886

Reply to This

Replies to This Discussion

If the mouse enters the attic from the fiberglas side (the living space side, in this example), the boric acid will not touch those little mousey feet; a hungry cat would be better than a cellulose layer on top that keeps the mice warm in winter and cool in summer.

 

If, however, the critters arrive from the top, then the cellulose primary fire protection ingredients (boric acid and aluminum sulfate) burn Mr and Mrs Mousie's little feetsies, and they'll exit the way they entered, usually a soffit vent or a hole in the facia. So as Ed M has pointed out, the air sealing effort is beneficial not just from the air leakage standpoint (and it IS) but also from the critter prevention perspective.

 

Best solution: air seal attic floor; feed the cat very little during cool autumn days, blow cellulose over the too thin layer of fiberglass, and here's one for the record book, leave a CFL in the attic ON, maybe two if there are corners, in order to inform the critters analyzing your attic that 'there's something happening here.'

 

Two 13 watt CFLs ON  24/7 will cost $2.25 a month at $0.12 a kwh; that's cheap compared to removing squirrel, lizard, bat, 'possum, raccoon, grizzly bear and mousie poop . Plus there's savings in cat food!

If you look @ the a cellulose manufactures web site (applegate, I'm not associated with them) you can see fiberglass losses 1/2 of its R-Value at temperature extremes ! Fiberglass can also be "fluffed" by turning the air up on the machine, cellulose cannot. Cellulose is denser and it will air-seal the area you cannot get to once it settles (usually about 1/2").

I have only blown cellulose for 28 years for these reasons... Hope this H.E.L.P.s

Ed: This discussion makes me think that you were right in 2008: having an article explaining the heat transfer mechanisms in fibrous insulation would be helpful. It is tempting, but time is a problem.

But think of the fame and glory.  I have seen many articles quoted by either glass or cellulose proponents saying how bad the other is (see above) but I don't trust any of them.  And the ASHRAE 518 (if I recall correctly) standard is just for heat transfer - no radiant or convective component - at a specific delta T.  So something definitive is needed.

Ed Minch

Ed M.: Thanks for the comment. My reply was directed at Ed Voytovich.

 

Ed V. approached me after a talk encouraging me to write a white paper on this. It never happened... Ed V.: from the many instances when this became an issue recently, you were right about the need.

 

Marcus

Air seal first.  Find top plates and penetrations, spray with 2 part.  

 

Where are you?  Why would you only go to R-38?  Remember, code is building the crappiest building legally allowed, why would you just go to code?  Seems an "always behind" way to do things.

 

Cellulose is cheap!  Since you are there, might as well go to R-60 and really bang it home.  

 

 

tedkidd makes a good point about exceeding code requirements from the time value of money and time value of time issues. Once you've air-sealed the attic floor, shopped for cellulose, brought it to the site, set up the blower, remote, lighting, ladder, baffles and are blowing old news, WHY NOT do a bang-up job and reduce the transmission of warmth, coolth and sound to absolutely negligible?

 

The Economist in us will reply something about the diminishing return of investment somewhere between 6 and 12 inches with current rates, but the Historian points out the rising costs of fuels and the relative ease of continued delivery of fluffy stuff now that we're here delivering the goods, and then the Psychologist concludes that just for peace of mind if not for immediate financial ROI, the extra ten or twenty-three bags and one hour or so will deliver a minor gain in comfort, a tiny dollar savings down the long road but a heap of satisfaction knowing that we did actually kick some ass up there and that a U-value of .016 is WAAY better than a U-value of .026!!

 

But selling it and billing it to others won't be quite the same as doing your own house. Still, it's worth a try to at least present an option. Marketing experts would suggest a name like the "The Alaska Attic" or "The Denali Option" or perhaps "Max Comforter" 

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Stacy Hunt posted an event

High Performance Enclosure Strategies: Part II, New Construction at Online

August 13, 2014 from 1pm to 2:30pm
Please join the Building America Program for our free webinar: High Performance Enclosure…See More
8 minutes ago
Richard Beyer replied to Howard Katzman's discussion UV lights on filters
"Howard, There are numerous manufacturer's who swear these systems work and then you have the…"
8 hours ago
Christopher Morin posted a blog post

How do You Test a TXV?

  Thermostatic Expansion Valves (TEV or TXV), one of the most popular metering devices for…See More
12 hours ago
Howard Katzman posted a discussion

UV lights on filters

I recently saw UV bulb installations in 2 HVAC systems in a home. Each system had the Lennox…See More
14 hours ago
Don Fitchett joined Michael Stuart's group
Thumbnail

INFRARED THERMOGRAPHY USERS

This group is dedicated to knowledge sharing and discussion of infrared thermography for building…See More
14 hours ago
Don Fitchett commented on Diane Chojnowski's group Pinterest
"While most of our (BIN95.com) energy post and boards are industrial related, there are crossovers…"
14 hours ago
Don Fitchett joined Diane Chojnowski's group
Thumbnail

Pinterest

Do you have a Pinterest board for energy topics?Post the link to your Pinterest energy board in the…See More
15 hours ago
Profile IconJosh Guenther, Deborah Green, Kenneth Brooks and 3 more joined Home Energy Pros
15 hours ago
Jim Gunshinan commented on Jim Gunshinan's blog post My Energy Upgrade California—The Numbers Are In
"Hi David, to answer one question, the crawlspace was covered with thick poly and the seams were…"
16 hours ago
David Eakin commented on Jim Gunshinan's blog post My Energy Upgrade California—The Numbers Are In
"Jim, Maybe a little more detail on the project is in order. You say that your crawlspace is now…"
16 hours ago
Jim Gunshinan commented on Jim Gunshinan's blog post My Energy Upgrade California—The Numbers Are In
"Ed, no problem, I caught your meaning. Ted, I made a judgement that a mini split would be the best…"
16 hours ago
tedkidd commented on Jim Gunshinan's blog post My Energy Upgrade California—The Numbers Are In
"That makes sense.   What are your criteria/metrics for determining what might be the…"
16 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service