As a rater and insulation contractor I personally respect the overall insulation properties of blown cellulose a lot more than blown fiberglass. I have taken numerous infrared images in attics with the same R-values, both products cellulose and fiberglass. I find time and time again poor performance of blown fiberglass. The R-values are similar, but cellulose is a much denser product.

I was wondering others raters and contractors thought were the same on this topic?

In the area I live in ( Eastern Iowa) there are few contractors are using cellulose, from experience cellulose is a hassle to blow because of the amount dust in the air compared to fiberglass. Is this the same situation in other areas of the county.  I feel that it is worth the dust and dirt because it is denser (giving the customer a better value) and a added bonus is the amount of recycled content in cellulose is a lot greater compared to fiberglass. I feel that there is a lack of education on the topic because most home owners feel that all insulation works the same. I have been working to overcome this idea and promote what I believe is a better overall product.

 

I look forward to reading any relies on this topic

 

Thanks,

 

Isaiah

Energy Core, LLC

 

Views: 14498

Reply to This

Replies to This Discussion

All things being equal & everything being done properly (air sealing, baffles, hatches) - both work fine but cellulose will win out not because of your reasons, but the simple fact that FG R-Value drops the hotter it gets.

Granted you could argue that if it was as dense as cellulose, the convection issue would be diminished but it would not be eliminated & said convection issue is one of the biggest causes of FG's loss of R-Value. Of course once both products are saturated with heat (for better lack of a term) the game is over and it is up to the AC unit to work it's magic  

As an FYI, many FG manufacturers are using recycled materials to make the product & in either case recycled doesn't always mean better - some methods & the means required to make a product from recycled materials can use more energy & put off more by products than simply using new materials

Hi Isaiah, Here in upstate NY we primarily use cellulose for blowing attics and dense packing sidewalls.It's cheaper, heavier, and as you noted performs better in single family residences. The one area that fiberglass works better than cellulose is on mobile home retrofits. On mobile home belly and roof blows it's lighter and absorbs much less water vapor so it's the prefered product.

Oh yeah, I'm a nerd. At big Orange store today and stopped to read Fiberglass blow in package.

 

And I quote

Another method of insulating your attic is our loosefill insulation. Instead of laying batts or rolls, our AttiCat® Insulation Blowing Machine conditions the AttiCat® Expanding Blown-In PINK® Fiberglas Insulation by fluffing it along the length of the hose, adding millions of the tiny air pockets that give the material its insulating power. Because Fiberglas insulation will not settle, it will maintain the same energy-saving level over time, keeping your home comfortable for years to come.

 

Mmmm. Fiberglas the maker says will not settle.

 

Why?

My experience with cellulose began when I started to participate in the state of Massachusetts' home energy programs.

 

Cellulose was mandated for attics and other spaces. Before this, I had only seen blown-in fiberglass in the new home construction industry. Well, I am glad the folks in Massachusetts mandated the use of cellulose.

 

The material is more eco-friendly, it has proven to have a slower burn rate in tests (compared to all other insulation materials), it can serve as a partial air seal, and the dust issues can be reduced with certain strategies.

 

Let me also say that I am the foreman\super on all my company's insulation jobs, and I can tell you that (with proper air sealing performed prior to installing loose-fill cellulose insulation) there is no real comparison you can make when it comes to overall effectiveness of cellulose versus fiberglass.

 

In the end, one cannot stress enough the need to perform thorough air sealing of any space you wish to install blown-in insulation for.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Bud Poll replied to Hal Skinner's discussion How much heat energy is lost through the floor of a house?
"With conduction that ends at the bottom of the joists and convection that is naturally suppressed…"
32 minutes ago
Hal Skinner replied to Hal Skinner's discussion How much heat energy is lost through the floor of a house?
"Good morning Bud, Took a quick look at the site and a couple others listed on the Yahoo…"
2 hours ago
Bud Poll replied to Hal Skinner's discussion How much heat energy is lost through the floor of a house?
"Hi Hal, Search "Basecalc basement heat loss".  From memory Canada (nrcan) has/had a…"
3 hours ago
Michael Dunseith posted photos
16 hours ago
Hal Skinner replied to Hal Skinner's discussion How much heat energy is lost through the floor of a house?
"II just remembered seeing a report by a federal adency, many years ago, that basically said …"
19 hours ago
Don Fitchett commented on Tom White's video
Thumbnail

Alliant Energy's PowerHouse TV: Sealing Leaky Ductwork

"Very educational. thanks for sharing Tom."
22 hours ago
Hal Skinner posted a discussion

How much heat energy is lost through the floor of a house?

I am asking this as I do not recall anyone speaking of any study to this end.  Many comments about…See More
22 hours ago

Mike Braun just added their location.
(via Member Map)

23 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service