Ballasted roofs. How prevalent and how effective at energy efficiency are they?

I dont see a whole lot of these in my area.  Until recently I did not realize that they can be designed to meet 'Cool Roof'. specifications.

 

How many of these do you see in your area?  These are extremely heavy roofs with that much rock.

Views: 211

Reply to This

Replies to This Discussion

Found at the link Hal provided:  "A typical ballasted roof system consists of 10 pounds per square foot (49 kg/m2) of river-rock ballast over an EPDM membrane, rigid insulation and a metal roof deck."
I haven't seen one in years, generally we busy ripping them up & replacing them due to leaks & deterioration - personally I rather see a layer of insulation & a coating, and so would the owners when it comes time to repair or replace it

I agree with you.  I can't remember how long it has been since I have seen one even getting replaced.

 

Here we have the DOE setting standards for ballasted roofs so they can be considered a 'Cool Roof' also along with all the other types of roofs..  This would surely be considered a good thing if it is more energy efficient than a ballasted roof without the coating.  However, ( and speaking only for our roof coating)  there is absolutely NO WAY we would ever give a warranty for this specific application.  Rocks on top of our coating would not phase it's performance in the cold months but would definitrly drop its effectiveness in the hot months.

Spoke to the inventor of our coating yesterday.  He has not seen a ballasted roof in at least 20-years.

Anyone have any ideas where they are still used?????

Apperently ballasted roofs are still used in the UK and other parts of Europe as well as a few areas in the US.  News to me!

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Malcolm McKelvie replied to Alan Gindt's discussion Minneapolis Blower Door System for sale in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"How old is it? I assume it is in good working order? I'm interested in it but the price needs…"
37 minutes ago
William H Nickerson replied to Kim Tanner's discussion Fantastic innovation
"So that's where you use those True Flow plates....."
4 hours ago
Colin Genge updated an event
Thumbnail

Passive House Testing Webinar with Kevin Brennan of the Passive House Academy at Online

September 29, 2015 from 1pm to 2pm
Tests needed to qualify as a passive houseWhy we’re seeing an increase in PH buildingsBest…See More
11 hours ago
Colin Genge updated an event
Thumbnail

DM32 Smart Gauge 101 Webinar at Online

September 22, 2015 from 1pm to 2pm
Webinar Learning Objectives:Gauge settings and operationCalculate results in the gaugeUpdate the…See More
11 hours ago
Colin Genge updated an event
Thumbnail

Blower Door 101 Webinar at Online

September 15, 2015 from 1pm to 2pm
See how easy it is to do your first test. Learn tips to perform your first duct test in only twenty…See More
11 hours ago
Colin Genge updated an event
Thumbnail

Zone Pressure Diagnostics (ZPD) with Bill Eckman of NME$A Webinar at Online

September 10, 2015 from 1pm to 2pm
Benefits and limitations of Zonal Pressure Diagnostics (ZPD).Best practices for accurate…See More
11 hours ago
Colin Genge updated an event
Thumbnail

Problem Solving- Air Tightness Tests of Large Buildings Webinar at Online

September 1, 2015 from 1pm to 2pm
Effect of Stack Pressure during airtightness tests in tall buildings-caluculating the effectsHow…See More
11 hours ago
Kim Tanner posted a discussion

Fantastic innovation

What an awesome example of fantastic innovation!Check out the TrueFlow Capture Box CEE made!…See More
12 hours ago

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service