Is anyone aware of a few decent Ohio distributor/wholesaler of energy and weatherization products? As supposed to the other “Big box boys”?

Thanks,

Views: 118

Reply to This

Replies to This Discussion

Blevins (just outside of Dayton) for mobile homes/ Applied Energy for equipment and supplies, I think they are in the Akron area

Thanks,

I've found that it can be a real search.in most parts of the state.

Applied Energy Products, 4255 Kropf Ave., Canton, OH 44706-3648, 800-255-7996 has supplied the weatherization agencies for decades and had a good spread of the basics, the last time I looked.

I also use a company in IN which typically has given me three day service.

Most of the materials I would choose do not seem to be carried by the "big boxes".  Handyman" and some of the smaller chains often have materials which the big boys either haven't discovered or don't see enough market for.

I've found that I have to wander the web for much of what I want to use or recommend.

Tremco, an OH company, makes some very useful specialty sealants, including the notorious "Black Death" Acoustic Sealant, but I  can't recommend a retail source.

Hope this helps.

If you are a business... Grainger,  Gensco, perhaps EFI.. 

TruTech Tools' home office is in Akron, Ohio.

TruTech Tools is a distributor of test instruments for HVAC/R, energy and weatherization, emissions, and education. We carry AppionBacharachFlirFlukeTestoMinneapolis Blower Door and DuctBlaster(R), and Retrotec Blower Doors, just to name a few. In addition to tools, we are a great source for information and training, including opportunities to earn BPI and NATE CEUs.

Our virtual door is always open! Check out our website www.TruTechTools.com, call 1-888-554-3437, or email info@TruTechTools.com to learn more.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Hal Skinner replied to Tony Rigdon's discussion Placement of 5/8" firewall, over or under foam board insulation?
"Found an article that might help …"
2 hours ago
Bud Poll replied to Tony Rigdon's discussion Placement of 5/8" firewall, over or under foam board insulation?
"Hi Tony, what/where is your climate?  Also, how is the rest of the wall constructed? Adding…"
2 hours ago
Sean Lintow Sr replied to Tony Rigdon's discussion Placement of 5/8" firewall, over or under foam board insulation?
"contact the local AHJ for sure - but for "fire" reasons it should be on the outside…"
5 hours ago
Tony Rigdon posted a discussion

Placement of 5/8" firewall, over or under foam board insulation?

I'm adding onto my personal residence and since the house is within five feet of the property line,…See More
6 hours ago
Hal Skinner replied to Hal Skinner's discussion Rooftop A/C units and exposed ductwork in the group The RCC Classroom (Radiant Control Coatings)
"Hi Tom.   As far as media advertising goes for the good RCCs, it really doesnt work well at…"
8 hours ago
Sean Lintow Sr commented on Chris Laumer-Giddens's blog post Mini-Split Heat Pumps are Quirky, Especially their Capacity
"Quick question Chris - the set & forget (for temperature setbacks) is that with any or just…"
10 hours ago
Martin Smith joined Hal Skinner's group
Thumbnail

The RCC Classroom (Radiant Control Coatings)

A group where energy professionals can learn about all the different energy saving aspects of…See More
12 hours ago
Anthony Cox added a discussion to the group Job Board
Thumbnail

PROJECT MANAGER/BUILDING SCIENCE TRAINER Community Housing Partners Christiansburg, VA

We are hiring and below is link to apply for the position we have available at Community Housing…See More
12 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service