Does anyone have experience or an opinion on Aeroseal duct leakage sealing system?

Views: 6348

Reply to This

Replies to This Discussion

There was a previous thread on this, I think, maybe 6 months ago?

Dave,

Thanks for the info on the past discussion on this product. I should have searched first before I posted

Ed

For reference, we have a local HVAC contractor that has been doing this for years.  In performing QA on a utility rebate, I questioned the home owner on the work he had done and found that "Dayco" had performed the aeroseal process on his ducts along with replacing the furnace.  I remember the duct leakage numbers being well below the rebate target of 10% of conditioned floor area with a cost of about $1,000 or so.  Standard duct sealing with mastic and hand contact with the ductwork runs around $400-500 in our area.

Taking into account whether or not ducts are accessable and/ or insulated under a pile of attic insulation may result in the Aeroseal process being the more efficient way to go, especially if you have to re-blow portions of the attic or re-wrap the ducts.

Here is their link.

http://www.daycoheating.com/

 

I went to a product demo at their offices. The product preformed well and i really think it will work well. My problem is that the costs to the home owner is about double what they say it will be. In my area of New York labor is high and insurance is higher two items that leave out of their projected costs.
Eliot-----------thanks for the reply. When you say the labor and insurance were left out, is that the way it was suggested that the job is quoted. That is very unusual.
no it was the way they tried to say you can make a fast $1000 at $1500 to the home owner. but in reality it cost you more to actually do the work due to the other costs they didnt include.
You make a good point, Eliot. Home owner costs are different in different regions. And in New York, where everything is more expensive (median home prices near $500k) home owner costs will certainly be higher than average. Aeroseal says the average (nationwide) cost to home owners is $1,100 - $1,500. Gross margins for service providers is somewhere around 25%-50%. That's "gross" not "net". I would think this is more than enough to cover labor and insurance costs - and quite a viable option for pros looking to expand their home energy conservation services. 

Ed,

 

Just an fyi, there were problems within Carrier when they owned the rights and the project/technology was shelved just as their second generation of machine was hitting the market.  Aeroseal was sold and is now back on the market under the Aeroseal name.

 

We are now a dealer for Aeroseal and could not be more happy with the results we've been getting.  The process is labor intensive to get setup (removing register covers, blocking and sealing boots, etc...), but the sealing process works great.  We were just called in to help out with a house for one of our Raters (we are a RESNET Rating and Rater Training Provider, and BPI Affilliate), that works on houses for Habitat.  One of their homes was going to fail Energy Star because of duct leakage (they had tried to seal the ducts themselves but caught the problem too late after drywall)- we came in and we're able to take total supply leakage from 369 CFM@25 to under 60 and the the cavity ducted returns from over 400 CFM to approximately 44 CFM@25.

 

In another example - a house with two separate air handlers and duct systems - we were able to reduce the total system leakage (boots, ducts, air handler, etc...) by over 80%.  The house was only 6 years old, and the return and supply were metal rectangular trunks with round branch ducts.  Both systems had over 400 CFM of supply leakage, and about equal return leakage (not including the boots).  Given both systems total flows were only about 1,300 CFM (actual measured flows), that means over 30% was being lost to floor cavities, wall cavities and some to the outside.  The home owners saw a 16% reduction in total KWH year over year the first month (with only about 2 weeks of the billing cycle being included after sealing), with the exact same average daily temperature for the month as the year prior.

 

We'll be putting these examples and more out on our website soon.  Check out our website for more information - Priority Energy , but in short - so far we are really happy with the product.  We operate in Illinois, Wisconsin, Iowa, Michigan and Indiana.

 

 

Could anyone give me an idea of investment cost of this system....?

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Jim Gunshinan posted a blog post
2 hours ago
Kim Tanner commented on Diane Chojnowski's group Home Energy Pros on Twitter
"Follow The Energy Conservatory on Twitter! We'll follow…"
5 hours ago
Kim Tanner joined Diane Chojnowski's group
Thumbnail

Home Energy Pros on Twitter

We've created a twitter list of members of Home Energy Pros who tweet!See More
5 hours ago
Rob Moreno is now a member of Home Energy Pros
6 hours ago
Bud Poll replied to Kaushal Bharath Raju's discussion Affordability & Deep Energy Upgrade/Passive House Retrofit in Berkeley, California.
"Hi Kaushal, First step is to understand where you are in terms of energy costs.  If current…"
8 hours ago
Kaushal Bharath Raju posted a discussion

Affordability & Deep Energy Upgrade/Passive House Retrofit in Berkeley, California.

We have a small 1940s single level house (1005sqf) in Berkeley, California that is in need of a…See More
15 hours ago
Christopher Morin posted a blog post

5 Things New Energy Efficiency HVAC Contractors Need to Know

1. Do not sell on Price! Use 'Simple Payback'The price of High-efficient equipment will undoubtedly…See More
21 hours ago
David Eggleton commented on David Eggleton's group Considering Permaculture &/or Transition
"In August 2014, in Minnesota, there's another unprecedented opportunity to meet and mix with a…"
yesterday
Glen Gallo commented on Jim Gunshinan's blog post Energy Upgrade California—Up Close and Personal
"Nate, RE: Duct test On my own home and a rental I have tested more than once over the last many…"
yesterday
Profile Iconangela hines and Charles Goldman joined Home Energy Pros
yesterday
Jeff Flaherty joined Diane Chojnowski's group
Thumbnail

Tools of the Trade

A hammer and a saw used to be the key tools for home contractors. Today, the best-in-breed also use…See More
yesterday
Jeff Flaherty joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
yesterday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service