Patrick Michaelyan's Discussions (219)

Discussions Replied To (181) Replies Latest Activity

"Thanks Joe. What are your thoughts (as mentioned in previous threads) about getting…"

Patrick Michaelyan replied Aug 24, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"Great point Pat. I will let you all know what I find when I do my next analysis."

Patrick Michaelyan replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"Can't argue with that. Thanks for all the advice on this matter Ted."

Patrick Michaelyan replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"At this point I am taking in all that you folks have been saying. The previous buil…"

Patrick Michaelyan replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"I will inspect for the roof\wall connection of the foam. Natural gas, atmospherical…"

Patrick Michaelyan replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"Bob, you and others have been speaking to this possible need for no heat upstairs. I…"

Patrick Michaelyan replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"3,000 square feet conditioned space (1,400 on 1st floor, 1,000 on 2nd floor, and 600…"

Patrick Michaelyan replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"Very good points Ted. This is worth its own discussion (and maybe more than just one…"

Patrick Michaelyan replied Aug 17, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"Very good points Tom. And like the rest of you, I would like to do it right the firs…"

Patrick Michaelyan replied Aug 17, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"Thanks Doug. Unless any others have any objections, I will be going to the HOs and…"

Patrick Michaelyan replied Aug 15, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Nate Adams joined Diane Chojnowski's group
Thumbnail

Hall of Shame

In this group, members share an array of images from the field, showing the kinds of issues…See More
27 minutes ago
tedkidd commented on Diane Chojnowski's group Hall of Shame
"Give this thread a bump - here's my "bad" album and some of the…"
58 minutes ago
Eric Kjelshus commented on Adam Swain's blog post Top Worst Crawl Space Insulation Ideas
"6) Radiant barrier- under the gravel is just a barrier but with holes each square inch its not a…"
1 hour ago
tedkidd replied to Luis Hernandez's discussion Distribution Efficiency and heating safety factor in TREAT in the group TREAT Software
"It is very common to find equipment grossly oversized. I mean 1.5 - 2x Manual J and 2-3x the size…"
1 hour ago
tedkidd replied to Luis Hernandez's discussion Basic Heat loss information in the group TREAT Software
"Luis,  Click "selected reports, energy savings and use, design heating and cooling…"
1 hour ago
Ed Minch replied to Kurt Shafer's discussion Where can I find the best radiant barrier to install under my roof?
"The important thing here is the surface temperature of the ceiling against the attic as compared to…"
1 hour ago
Profile IconSharon DeRidder, Jason Hiep, Chris Chmiel and 4 more joined Home Energy Pros
2 hours ago
John Watson Ley replied to Luis Hernandez's discussion Distribution Efficiency and heating safety factor in TREAT in the group TREAT Software
"Luis, Good Evening, John of NY Construction Pros here. I don't think you need to worry about…"
14 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service